ActionTec R1020S(U) User Manual page 36

Appendix D
To determine the MAC address of an installed Ethernet card on Windows
95/98:
1. Click the Start menu
2. Select Run
3. In the text field type: winipcfg
4. Click OK
5. An IP Configuration window will appear
6. Carefully make note of the Adapter Address as it is the same as you MAC address
To determine the MAC address of an installed Ethernet card on Windows ME:
1. Click the Start menu
2. Select Run
3. In the text field type: winipcfg
4. Click OK
5. An IP Configuration window will appear
6. Carefully make note of the Adapter Address as it is the same as you MAC address
To determine the MAC address of an installed Ethernet card on Windows 2000:
1. Click the Start menu
2. Select Programs, and then Accessories
3. Select Command Prompt
4. Type: ipconfig/all
5. Press Enter
XI
6. A window will display, with information pertaining to the Ethernet Adapter
70
Appendix D
7. Make note of the Physical Address of the Ethernet Adapter (labeled 'Physical
Address') as it is the same as you MAC address
To determine the MAC address of an installed Ethernet card on Windows NT:
1. Click the Start menu
2. Select Programs
3. Select Command Prompt
4. Type: ipconfig/all
5. Press Enter
6. A window will display, with information pertaining to the Ethernet Adapter
7. Make note of the Physical Address of the Ethernet Adapter (labeled 'Physical
Address') as it is the same as you MAC address
To determine the MAC address of an installed Ethernet card on a Macintosh:
1. Select the Apple menu.
2. Select Control Panels
3. Select TCP/IP
4. Select the Info button (If the Info button does not appear, select the Edit menu,
then User Mode and then select Advanced)
5. A window will display showing the hardware address
6. Carefully make note of this Hardware address as it is the same as the MAC address
XI
71
Appendix D