Cleaning The Display - Trane Tracer AdaptiView Operation Manual

For water-cooled centravac chillers

Hide thumbs Also See for Tracer AdaptiView:

Table of Contents

2. Touch the up or down arrow key on the screen until the your desired selection

3. Touch Save to confirm your selection and return to the Settings screen.

Cleaning the Display

On the Settings screen, touch Clean Display to disable the Tracer AdaptiView display

screen for 15 seconds so that you can clean the screen without it responding to touch.

During this time, the screen is black with a number in the center that counts down the

seconds. After 15 seconds, the Settings screen re-appears

Figure 31. Cleaning Mode countdown screen

CTV-SVU01B-EN • Tracer AdaptiView Display Operations Guide

appears. Repeat the process for any other attributes you want to change.

Display Settings

(Figure

31).

Table of Contents