Trane Tracer AdaptiView Operation Manual page 25

Table 6. Chiller submodes (continued)
Top-level mode
Auto
Waiting To Start
Starting Compressor
Running
Running—Limit
Free Cooling
Preparing to Shutdown
Shutting Down
CTV-SVU01B-EN • Tracer AdaptiView Display Operations Guide
Corresponding sub-level mode
Waiting for Evaporator Water Flow
Waiting For A Need To Cool
Waiting For a Need To Heat
Power Up Delay Inhibit
Waiting For Condenser Water Flow
Establishing Oil Pressure
Pre-Lubrication Time
Motor Temperature Inhibit: Motor Temperature/Inhibit Temperature
Restart Time Inhibit
High Vacuum Inhibit: Oil Sump Press/Inhibit Press
Low Oil Temperature Inhibit: Oil Temperature/Inhibit Temperature
Waiting for Starter To Start
No submode is displayed.
No submode is displayed
Hot Water Control
Surge
Base Loaded
Hot Gas Bypass
Ice Building
Ice To Normal Transition
Current Control Soft Loading
Capacity Control Soft Loading
Current Limit
Phase Unbalance Limit
Condenser Pressure Limit
Evaporator Temperature Limit
Minimum Capacity Limit
Maximum Capacity Limit
Opening Free Cooling Valves
Closing Free Cooling Limit
Closing IGV
Post-Lubrication Time
Evaporator Pump Off Delay
Condenser Pump Off Delay
MIN:SEC
MIN:SEC
MIN:SEC
MIN:SEC
IGV Position %
MIN:SEC
MIN:SEC
MIN:SEC
Reports
25