Page 1
/E 1 ® Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Document Number: 61179641L4-5B CLEI Number: VAMBD00A_ _ September 2007...
Page 2
In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this document.
Revision History Revision Date September 2005 September 2007 Conventions The following typographical conventions are used in this document: This font indicates a cross-reference link. t indicates screen menus, fields, and parameters. This fon indicates keyboard keys ( HIS FONT are shown with a plus sign ( same time).
Page 4
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Training ADTRAN offers training courses on our products. These courses include overviews on product features and functions while covering applications of ADTRAN product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at customer sites.
Page 9
Figure 3-10. Total Access 1248 POTS and ADSL+POTS Connections ......3-14...
Page 10
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Figure 5-25. ATM Port Cell Count Summary Screen ..........5-42 Figure 5-26.
Page 11
Figure 5-72. E1 Test Menu ............. . . 5-109 Figure 5-73.
Page 12
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Figure 5-120. System Event Log Screen ........... . . 5-170 Figure 5-121.
Page 13
Total Access 1248 Main Menu Options ........
Page 14
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-36. Static IP Settings - for IP over Ethernet Menu Options ....... . 5-61 Table 5-37.
GENERAL The Total Access 1248 (see Figure (DSLAM) system that is used to further extend Asymmetrical Digital Subscriber Line (ADSL) services in the network. TOP:POTS BOTTOM: ADSL+POTS PORTS 1-24 61179641L4-5B Section 1 Introduction 1-1) is a Digital Subscriber Line Access Multiplexer...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice DESCRIPTION The Total Access 1248 is a mini-DSLAM that accepts up to eight T1 network feeds assigned to a single IMA group. Inverse Multiplexing over ATM (IMA) is a technology used to bond multiple (DS1) links into a single data pipe.
Total Access 1248 front panel LEDs. Upon initial powering, the Total Access 1248 system performs a power up self-test. Once the power up self-test is complete, the status LEDs reflect the condition of the hardware.
The Total Access 1248 is NRTL listed to the applicable UL standards. The Total Access 1248 meets or exceeds all the applicable requirements of NEBS, Telcordia GR-63-CORE, and GR-1089-CORE.
Page 21
Per GR-1089-CORE the Total Access 1248 is designed and intended for installation as part of a Common Bonding Network (CBN). The Total Access 1248 is not designed nor intended for installation as part of an Isolated Bonding Network (IBN). Per GR-1089-CORE Section 9, the Total Access 1248 is intended to be deployed in either a DC-C (common) or DC-I (isolated) installa- tion of the Total Access 1248.
Page 22
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice This page is intentionally blank. 61179641L4-5B...
Application Guidelines INTRODUCTION The Total Access 1248 provides 48 ADSL2+ plus POTS ports downstream to the subscriber, one to eight T1 IMA ports upstream to the network, local and remote management capabil- ities, and front panel LEDs that indicate status.
EXPANSION Up to four Total Access 1248 systems can be connected together (see units must be a Total Access 1248 host unit (P/N 1179641L4) and the others are Total Access 1248 client units (P/N 1179641L5). The client units (also referred to as Expansion units) have RJ-45 jacks, labeled , for the purpose of expanding one to another.
After unpacking the Total Access 1248, inspect it for damage. If damage has occurred, file a claim with the carrier and then contact ADTRAN Customer Service. Refer to Warranty”...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Shipping Contents The shipping container for the Total Access 1248 includes the contents shown in Table 3-1. Total Access 1248 Shipping Contents Description Total Access 1248 Octal T1 IMA DSLAM...
INSTALLATION PREREQUISITES The following items should be completed prior to installing the Total Access 1248: 1. Make sure that the network feed is in place. 2. Make sure that local power is available and that the required fuses are installed.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice INSTALLATION STEPS The following steps are required to install the Total Access 1248. Each step has an associated procedure which is referenced below the step. Each procedure provides detailed information for completing the step.
Mounting the Total Access 1248 The Total Access 1248 is shipped with two sets of mounting brackets that accommodate either a 19-inch or 23-inch rack. • The mounting brackets used for a 19-inch rack are part number 3265540. • The mounting brackets used for a 23-inch rack are part number 3265541.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Flush-mount For flush-mount systems, the Total Access 1248 must be mounted from the front of the rack, with mounting brackets in the flush-mounting orientation (see mounting a Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the mounting brackets to the front screw holes with the flanges containing the slotted rack- mounting holes facing the front of the Total Access 1248.
Mid-mount For mid-mount systems, the Total Access 1248 must be mounted from the front of the rack, with mounting brackets in the mid-mounting orientation (see Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the mounting brackets to the rear screw holes with the flanges containing the slotted rack-mounting holes facing the front of the Total Access 1248.
The ground wire must be 12 to 18 AWG, however, it must be as large or larger than the wire used for power. The Total Access 1248 must be grounded to a reliable grounding source. To connect the ground wire, perform the following steps: 1.
4. While holding the wire in place, tighten the setscrew until the wire is secure. 5. Repeat steps until all power leads are connected. 6. Apply power to the Total Access 1248 and test the voltage and polarity on the terminal block using the tops of the setscrews as test points. 61179641L4-5B NOTE –48 VDC A...
Ethernet Connection The Total Access 1248 interfaces with networks for management through an Ethernet port (see Figure 3-7). PORTS 1-24 Figure 3-7. Total Access 1248 Ethernet Port The following Ethernet protocols are supported: • IEEE 802.3, 10/100Base-T • DHCP Client Mode for Management •...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Alarm Connections The Total Access 1248 provides an alarm port (see inputs and three alarm outputs (Major, Minor, and Critical). Alarm inputs are activated by shorting A and B contacts (closing an externally connected relay). The outputs provide both normally open and normally closed pins (through internal relay contacts) for proper operation with a variety of alarm panels.
Figure 3-10. Total Access 1248 POTS and ADSL+POTS Connections POTS Interface Each POTS interface on the Total Access 1248 accepts a POTS signal from the Central Office (CO) and passes it through to the ADSL2+ plus POTS interface for delivery to the subscriber.
POTS Connection The Total Access 1248 must be connected to a POTS source to provide POTS to the subscribers. In a standard configuration, the POTS will be brought in from a nearby cross- connect. The Total Access 1248 accepts the POTS signal on the top two amphenol connectors labeled POTS.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 3-5. POTS and ADSL+POTS Cable Pin Assignments for Left-most Connectors Pair # Table 3-6. POTS and ADSL+POTS Cable Pin Assignments for Right-most Connectors Pair # 3-16 Pins R.T.
TOTAL ACCESS 1200F CONVERSION The order of subtended Total Access 1200 Series DSLAMS must be preserved when connecting to the Total Access 1200F for transla- tion to the legacy ATM mode PVCs. See Table 3-7. Order of Subtended Clients Total Access 1200F Expansion Port Existing Total Access 1200 Series DSLAM installations require a software upgrade to convert the Total Access 1200 Series DSLAMs to function with a Total Access 1200F.
Page 42
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice 3. Press and hold the key on the terminal keyboard and apply power to the Total Access 1200 Series DSLAM. 4. When prompted, select 38400 for a faster transfer rate (20 minutes at 38400 compared to 60 minutes at 9600).
QUICK TURN-UP STEPS Perform the following steps to complete a basic T1 turn-up of the Total Access 1248 system: 1. Connect VT100 terminal or personal computer emulating a VT100 terminal to the Total Access 1248 craft port. For more information, refer to 2.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice TID: HSVL00001 Unacknowledged Alarms: None Figure 3-13. Total Access 1248 Main Menu 5. Provision the appropriate network termination. 6. From the Total Access 1248 Main menu, select The Network Port menu (see...
The T1 Provisioning menu (see TID: HSVL00001 Unacknowledged Alarms: None Figure 3-16. T1 Provisioning Screen 61179641L4-5B Figure 3-15) displays. Total Access 1248 T1 Main Menu 1. T1 Provisioning 2. T1 Status 3. T1 Performance 4. Test 5. Restore T1 Factory Defaults...
Page 46
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice 10. From the T1 Provisioning menu, configure the setting to match the settings of the T1s provided. Press configure and continue this process until all the T1s are properly configured.
36. Confirm that the Traffic Descriptor default values match the local practices and modify accordingly. 37. Add the Service Profiles to the Total Access 1248 for the approved service. 38. Pre-provision the system using the information provided in the appropriate work order.
Page 48
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice This page is intentionally blank. 3-24 61179641L4-5B...
Provisioning Defaults INTRODUCTION The Total Access 1248 system default provisioning options are shown in detailed information on the Total Access 1248 menus, refer to Table 4-1. Default Provisioning Options Provisioning Option Available Options ATM Circuit Options PVCs User definable (Each ADSL connection must have at least one PVC/PVP for data flow.)
Page 50
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 4-1. Default Provisioning Options (Continued) Provisioning Option Available Options IP Address IP Feed RFC1483 Routed; IP over Ethernet; RFC1483 Bridged IP Mode Dynamic; Static IP Address 0–255.0–255.0–255.0–255 Subnet Mask 0–255.0–255.0–255.0–255...
Page 51
Table 4-1. Default Provisioning Options (Continued) Provisioning Option Available Options External Alarms Alarm Name 25-character string Alarm Severity Critical; Major; Minor; Load shedding Fan Alarm Delay 0–15 minutes Network Port E1 Provisioning E1 Framing FAS; FAS+CRC E1 Line Code HDB3; AMI T1 Provisioning T1 Type DSX;...
Page 52
Link Down Alarm Disabled; Enabled Rate Mode Fixed; Rate Adaptive Line Type Interleave; Fast * SNMP Community Names are case-sensitive. The Total Access 1248 system provides two SNMP Community Name accounts with the following defaults: • Name: private • IP Address: 0.0.0.0 •...
5-15 SYSTEM MANAGEMENT Total Access 1248 system management and provisioning is facilitated by a series of intuitive menus that are accessible on a computer screen. The Total Access 1248 provides two methods for management access: • “Craft Interface”...
2. Set the PC for direct connect on the appropriate communications port (as opposed to dial up connection). 3. Plug the male end of the data cable into the Total Access 1248. Make connection to the PC or laptop as appropriate for the equipment.
LOGGING ON TO THE TOTAL ACCESS 1248 To logon to the Total Access 1248 system, perform the following steps: 1. Establish the physical connection to the Total Access 1248. 2. If a craft port session is being used, proceed to step 3. If using a Telnet session proceed to step 4.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice MENU STRUCTURE The menu structure for the Total Access 1248 is a layered menu tree. Each layer of the menu tree is displayed as a menu or a screen.
. To return to the previous menu, press the NTER System Help screen, press the question mark ( Hot Keys Table 5-1 shows the general keyboard commands, and keys for the Total Access 1248 system. Table 5-1. General Keyboard Commands Keyboard Command ACKSPACE (or Return) NTER...
Page 58
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description This hot key is used to display the previous port. This hot key is used to display the next port.
Page 59
Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description IMA Performance Monitoring Status (Facilities) This hot key is used to display performance monitoring statistics for the last 2 hours, in 15 minute intervals. This hot key is used to clear the performance monitoring statistics. This hot key is used to display performance monitoring statistics for the next 2 hours, in 15 minute intervals.
Page 60
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description This hot key is used to select a specific port. Performance Monitoring Status This hot key is used to display performance monitoring statistics for the last 2 hours, in 15 minute intervals.
There are a number of menu screens designed to aid in the maintenance and troubleshooting of the Total Access 1248 system. A menu tree is a visual map that can be used to locate configuration information and provisioning options. The menu trees for the Total Access 1248 are listed below and can be found on the indicated pages: •...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice 1. Configuration Total Access 1248 2. ATM Circuit Management 3. System Management 4. Network Port 5. DSL Menus 6. System Alarms 7. System Event Log 8. Contact Information 9. Enter TL1 Mode 10.
1. Password Control 2. IP Address 3. Test IP Address 4. Time/Date 5. Baud Rate 6. TFTP Configuration Upload/Download Figure 5-4. System Management Menu Tree 61179641L4-5B 1. Set Passwords 2. Allow SNMP Security Management 3. Set Menus Idle Logout Time 4.
Page 64
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice 7. SNMP/TL1 8. Download New Code 9. Restore Factory Defaults 10. Reset System 11. Self Test Results 12. External Alarms 13. Expansion Menu System Uptime Figure 5-4. System Management Menu Tree (Continued) 5-12 1.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice 1. DSL Profiles 1. ADSL Provisioning 2. Alarm Profiles 3. Port Provisioning 4. Restore ADSL Provisioning 1. ADSL Status 2. ADSL Status 2. All ADSL Ports Status 3. ATU-R Information 4.
The Main menu options have several functions and submenus that identify and provide access to specific operations and parameters. TID: TA1248 Unacknowledged Alarms: None Figure 5-7. Total Access 1248 Main Menu The Total Access 1248 Main menu options are shown in Table 5-3. Total Access 1248 Main Menu Options Option Description Configuration...
Page 68
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-3. Total Access 1248 Main Menu Options (Continued) Option Description System Event Log Contact Information Enter TL1 Mode Logoff 5-16 Function This option displays the “System Event Log Screen”...
The Configuration screen (see instance, the CLEI Code and Part Number can be used to search for related information on the ADTRAN web site or to order additional parts. The software revision may be required when calling the ADTRAN Technical Support.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice ATM Circuit Management Menu ATM Circuit Management Main Menu\ATM Circuit Management\ The ATM Circuit Management menu (see maintain customer circuits. From this menu, a Permanent Virtual Circuit/Permanent Virtual Path (PVC/PVP) for each ATM circuit can be viewed, created, or modified. PVCs are logical connections between ports that allow data to be sent from the network to a customer location.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Page 1 of 1 Circuit ID Circuit ID: Select: Service PCR(0+1) Best Effort Endpoint 1: Port Enter # or arrow keys to pick circuit; space bar for choices or c,d,m,n,o,p,v,q Figure 5-11.
Create a New PVC/PVP Screen Create New PVC/PVP Main Menu\ATM Circuit Management\PVC/PVP The Create a New PVC/PVP screen (see connections. Each ADSL connection has at least one PVC/PVP per ATM circuit provisioned for data flow. PVC/PVPs map ATM circuits from the network to the ADSL ports. Port Netw ____________________________________________________________...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-7. Create a New PVC/PVP Screen Fields (Continued) Field Service Circuit ID Pkt Discard Table 5-8. PVC/PVP Service Options Service Description Unspecified bit rate Constant bit rate • PCR •...
Delete an Existing PVC/PVP Screen Delete Existing PVC/PVP Main Menu\ATM Circuit Management\PVC/PVP When the hot key is selected to delete a PVC/PVP, a confirmation prompt at the bottom of the screen (see Figure 5-13) displays. Page 1 of 1 Circuit ID Circuit ID: Select: Service...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Modify an Existing PVC/PVP Screen Modify Existing PVC/PVP Main Menu\ATM Circuit Management\PVC/PVP The Modify an Existing PVC/PVP screen (see PVPs. Port Netw ____________________________________________________________ Service Circuit ID ____________________________________________________________ When finished, place cursor here to select action: Modify existing circuit and return to PVC/PVP Management NOTE: No changes will take effect until an action is selected and executed.
• Sustained Cell Rate • MBS • Maximum Burst Size 61179641L4-5B Description This field identifies ATM Traffic Class. There are four service options (Traffic Descriptors) available for the Total Access 1248 system: • UBR • CBR • VBR-rt • VBR-nrt...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Current ATM OAM Statistics Menu Current ATM OAM Statistics Main Menu\ATM Circuit Management\PVC/PVP The Current ATM Operations and Maintenance (OAM) Statistics menu (see displays the network and line side OAM information for each ATM circuit.
The Current ATM OAM Statistics menu fields are shown in Table 5-12. Current ATM OAM Statistics Menu Fields Field Endpoint 1 Rx OAM Cells AIS State RDI State Endpoint 2 Rx OAM Cells AIS State RDI State 61179641L4-5B Table Description This field displays the total number of received OAM cells for Endpoint 1.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice OAM Loopback Test Menu OAM Loopback Test Main Menu\ATM Circuit Management\PVC/PVP Management\Current ATM OAM The OAM Loopback Test menu (see mation for each ATM circuit. TID: TA1248 Unacknowledged Alarms: None...
Table 5-13. OAM Loopback Test Menu Options (Continued) Option Description Send from Endpoint 1 to Network Send from Endpoint 2 to Customer Reset Loopback Statistics The OAM Loopback Test menu fields are shown in Table 5-14. OAM Loopback Test Menu Fields Field Endpoint 1 Port...
Page 82
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-14. OAM Loopback Test Menu Fields (Continued) Field Tx Loopback Response Rx Loopback Response Loopback Passed Loopback Failed Modem Status 5-30 Description This field displays the total number of transmitted loopback responses.
Clear All PVC PM The Current ATM PVC Performance menu fields are shown in 61179641L4-5B Management\Current ATM PVC Performance\ Figure 5-17) displays the network and port side Total Access 1248 Current ATM PVC Performance Endpoint 2 Modem Status Port VPI Down Endpoint 2 (Net <-- Cust)
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-16. Current ATM Port Performance Menu Fields Field Endpoint 1 (Net --> Cust) Tx Cells Discarded Queue Full Cells/Sec (Last Sec) Cells/Sec (60 Sec Avg) Endpoint 2 (Net <-- Cust)
ATM PVC/PVP Management menu after creating new ATM circuits using the ATM Quick Provisioning menu with the settings shown in 61179641L4-5B Management\ATM Quick Provisioning\ Figure 5-18) is used to quickly create ATM circuits Total Access 1248 ATM Quick Provisioning Endpoint 1 Port Port Netw...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Page 1 of 5 Circuit ID Circuit ID: Select: Service PCR(0+1) Best Effort Endpoint 1: Port Enter # or arrow keys to pick circuit; space bar for choices or c,d,m,n,o,p,v,q Figure 5-19.
Restore ATM Factory Defaults Menu Restore ATM Factory Defaults Main Menu\ATM Circuit Management\Restore ATM Factory Defaults\ The Total Access 1248 provisioning system provides the ability to restore the ATM parameters to the factory defaults. Figure 5-21 TID: TA1248 Unacknowledged Alarms: None This is for defaulting the ATM parameters only.
ATM Performance Monitoring Mode menu. TID: TA1248 Unacknowledged Alarms: None The Total Access 1248 tracks performance statistics for ATM ports via the ATM Performance Monitoring Mode menu (see 5-38 NOTE...
Change ATM Port Number ATM Performance Data ATM Port Cell Count Summary Clear All PM for All Ports 61179641L4-5B Total Access 1248 ATM Performance Monitoring Mode Port: Network 1. Change ATM Port Number Network 2. ATM Performance Data 3. ATM Port Cell Count Summary 4.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice ATM Performance Monitoring Status Screen ATM Performance Monitoring Status Main Menu\ATM Circuit Management\ATM Performance Monitoring The ATM Performance Monitoring Status screen (see mance for the port selected. This menu lists the cell transmitted to the Network, cells trans- mitted to the customer, discarded cells, and the HEC Error count for the selected performance period.
The ATM Performance Monitoring Status hot keys are defined in Table 5-22. ATM Performance Monitoring Status Hot Keys Hot Key Description Backward (2hrs/15min PM) Clear PM Status Forward (2hrs/15min PM) Previous Port Next Port Select Port 61179641L4-5B Table Function This hot key is used to display performance monitoring statistics for the last 2 hours, in 15 minute intervals.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice ATM Port Cell Count Summary Screen ATM Port Cell Count Summary Main Menu\ATM Circuit Management\ATM Performance Monitoring The ATM Port Cell Count Summary screen (see for all ports simultaneously.
Clear All PM for All Ports Menu Clear All PM for All Ports Main Menu\ATM Circuit Management\ATM Performance Monitoring The Clear All PM for All Ports option is selected from the Menu. The Clear All PM for All Ports menu options are shown in Table 5-24.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice ATM OAM Settings Menu ATM OAM Settings Main Menu\ATM Circuit Management\ATM OAM Settings\ The ATM OAM Settings menu (see OAM settings and to test the Inband channel PVC for an ATM fed system.
Inband OAM Loopback Test Menu Inband OAM Loopback Test Main Menu\ATM Circuit Management\ATM OAM The Inband OAM Loopback Test menu (see 1248 OAM Loopback settings and to test the Inband channel PVC for an ATM fed box. TID: TA1248 Unacknowledged Alarms: None Port VPI...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-27. Inband OAM Loopback Test Menu Fields Field Port Tx Loopback Request Rx Loopback Request Tx Loopback Response Rx Loopback Response Loopback Passed Loopback Failed Rx OAM Cells...
Time/Date Baud Rate TFTP Configuration Upload/ Download 61179641L4-5B Figure 5-28) is used to manage system settings. The Total Access 1248 System Management 1. Password Control 2. IP Address 3. Test IP Address 4. Time/Date 5. Baud Rate 6. TFTP Configuration Upload/Download 7.
Page 100
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-28. System Management Menu Options (Continued) Option Description SNMP/TL1 Download New Code Restore Factory Defaults Reset System Self Test Results External Alarms Expansion Menu System Uptime 5-48 Function This option displays the “SNMP/TL1 Configuration...
Time Restore Default Passwords 61179641L4-5B Figure 5-29) is used to set and modify passwords, logout Total Access 1248 Password Control 1. Set Passwords 2. Allow SNMP security management 3. Set Menus Idle Logout Time 4. Set TL1 Menus Idle Logout Time 5.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Password Control Levels Screen Password Control Levels Main Menu\System Management\Password The Password Control Levels screen (see associated passwords that access the system. TID: TA1248 Unacknowledged Alarms: None Username Password...
5. Enter the password again when prompted to verify, and press 6. Press the key to navigate to the Access Level field. The Access Level field displays in reverse video. 7. Press the spacebar to change the access level, and press 8.
Mode Selection and Current IP Settings Main Menu\System Management\Mode Selection and Current IP Settings\ To remotely manage the Total Access 1248 system, the IP settings must be configured using the Mode Selection and Current IP Settings menu (see TID: TA1248 Unacknowledged Alarms: None Figure 5-31.
• In Static Mode, the IP address, Subnet mask, and Default Gateway are configured manually for inband management of the device. • In Dynamic Mode, the Total Access 1248 acts as a Dynamic Host Configuration Protocol (DHCP) client and a DHCP server is required upstream from the device to configure the IP settings.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Static IP Settings - for IP over ATM Menu Static IP Settings - for IP over ATM Main Menu\System Management\Mode Selection and Current IP The Static IP Settings - for IP over ATM menu (see all of the IP settings.
This option is used to configure the Default Gateway. The Default Gateway is used to forward traffic to a destination outside of the subnet of the Total Access 1248. The Default Gateway is configured in decimal dot format. This option is used to configure the TFTP IP address.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Restore IP Factory Defaults Menu Restore IP Factory Defaults Main Menu\System Management\Mode Selection and Current IP Settings\Static IP Settings - for IP over Defaults\ The Restore IP Factory Defaults menu (see factory defaults.
The Dynamic IP Settings - for IP over ATM menu (see the IP settings. When the Mode option is set to Dynamic, the Total Access 1248 system automatically retrieves the IP address, Subnet mask, and Default Gateway from the remote DHCP server.
Page 110
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-34. Dynamic IP Settings - for IP over ATM Menu Items (Continued) Option Description Default Gateway TFTP IP address TL1 Port Number (set >1023) TL1 IP Transport type Reset IP Factory Defaults The Media Access Control (MAC) address is set at the factory.
Option Definition Yes - Service Affecting 61179641L4-5B Figure 5-35) is used to reset all of the IP factory CAUTION Total Access 1248 Restore IP Factory Defaults 1. Yes - Service Affecting Selection : '?' - System Help Screen Table 5-35.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Static IP Settings - for IP over Ethernet Menu Static IP Settings - for IP over Ethernet Main Menu\System Management\Mode Selection and Current IP The Static IP Settings - for IP over Ethernet menu (see provision all of the IP settings.
This option is used to configure the Default Gateway. The Default Gateway is used to forward traffic to a destination outside of the subnet of the Total Access 1248. The Default Gateway is configured in decimal dot format. This option is used to configure the TFTP IP address.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Restore IP Factory Defaults Menu Restore IP Factory Defaults Main Menu\System Management\Mode Selection and Current IP Settings\Static IP Settings - for IP over Factory Defaults\ The Restore IP Factory Defaults menu (see factory defaults.
The Dynamic IP Settings - for IP over Ethernet menu (see some of the IP settings. When the Mode option is set to Dynamic, the Total Access 1248 system automatically retrieves the IP address, Subnet mask, and Default Gateway from the remote DHCP server.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-38. Dynamic IP Settings - for IP over Ethernet Menu Items Option Description IP address Subnet mask Default Gateway TFTP IP address TL1 Port Number (set >1023) TL1 IP Transport type Reset IP Factory Defaults The Media Access Control (MAC) address is set at the factory.
Option Definition Yes - Service Affecting 61179641L4-5B Figure 5-39) is used to reset all of the IP factory CAUTION Total Access 1248 Restore IP Factory Defaults 1. Yes - Service Affecting Selection : '?' - System Help Screen Table 5-39.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Test IP Address Menu Test IP Address Main Menu\System Management\Test IP Address\ Ping and Traceroute utilities are included on the Test IP Address menu (see testing the IP configurations.
Table 5-41. Time/Date Adjust Menu Options Option Description Adjust Time Adjust Date 61179641L4-5B Figure 5-41) is used to set the system time and date. The Total Access 1248 Time/Date Adjust 1. Adjust Time 2. Adjust Date Selection : '?' - System Help Screen Table 5-41.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Current Baud Rate Menu Current Baud Rate Main Menu\System Management\Current Baud Rate\ The Current Baud Rate menu (see management port baud rate is 9600 bps. TID: TA1248 Unacknowledged Alarms: None Baud Rate change is instantaneous, remember to adjust your terminal Figure 5-42.
Management\TFTP Configuration Storage/Retrieval\ The TFTP Configuration Storage/Retrieval screen (see sioning information for the Total Access 1248 system to a remote TFTP server for possible restoration at a later time. In addition to its obvious use for fast recovery of shelf provisioning information, the TFTP Configuration Storage/Retrieval screen can be used to “clone”...
Page 122
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-43. TFTP Configuration Storage/Retrieval Screen Fields (Continued) Field Error Status Update Progress For alternate methods to store or retrieve the Total Access 1248 System Configuration Archive (SCA) file see Configuration Storage and Retrieval”...
Option Description Contact Information Community Names Trap Hosts Traps Enabled TL1 Target ID 61179641L4-5B Total Access 1248 SNMP/TL1 Configuration 1. Contact Information 2. Community Names 3. Trap Hosts 4. Traps Enabled 5. TL1 Target ID TA1248 Selection : '?' - System Help Screen Table 5-44.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice SNMP Contact Information Menu SNMP Contact Information Main Menu\System Management\SNMP/TL1 The SNMP Contact Information menu (see be customized to reflect any contact, name, and location. TID: TA1248 Unacknowledged Alarms: None 1.
Description Name IP Address Privileges Name 61179641L4-5B Configuration\SNMP Community Names\ Figure 5-46) is used to establish up to three named Total Access 1248 SNMP Community Names Set Name to 0 to delete Community private 0.0.0.0 Read/Write public 0.0.0.0 Read Not Configured 0.0.0.0...
Page 126
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-46. SNMP Community Names Menu Options (Continued) Option Description IP Address Privileges Name IP Address Privileges 5-74 Function This option is used to configure the second SNMP community IP address in decimal dot format (i.e., ###.###.###.###).
The SNMP Trap Hosts Menu (see nations) and SNMP versions for notification of a trap. A trap is an automatic alert, or notifi- cation, sent to an IP Address. The Total Access 1248 system forwards SNMP traps to all configured hosts as the traps occur.
Page 128
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-47. SNMP Trap Hosts Menu Options (Continued) Option Description Version IP Address Version Trap Port The SNMP version should match the agent used for SNMP on the network management side.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice The System Management menu TFTP IP address option must be configured to use TFTP. Y-Modem Menu Y-Modem Main Menu\System Management\Code Download The Y-Modem menu (see Figure Total Access 1248 through the craft port.
TFTP Download Screen TFTP Download Main Menu\System Management\Code Download The TFTP Download screen (see to the Total Access 1248 through a TFTP server. TID: TA1248 Unacknowledged Alarms: None Press Space bar to enter TFTP address Figure 5-50. TFTP Download Screen...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-49. TFTP Download Screen Fields Field TFTP Server Get Code For TFTP Filename Error Status Update Progress 5-80 Description This field displays the IP address of the TFTP server. The TFTP IP address must be configured prior to attempting a TFTP download.
Main Menu\System Management\Code Download The Auto Upgrade Configuration (AUC) Status menu (see manually or automatically upgrade the Total Access 1248 firmware. When enabled, the Auto Upgrade operation performs the following tasks: • reads the AUC Configuration file from the designated AUC TFTP server •...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-50. Auto Upgrade Configuration (AUC) Status Menu Options Option Description AUC Config File AUC Mode AUC Refresh Interval AUC Upgrade Retries AUC TFTP Server AUC Base Path Auto Upgrade operations will not be initiated if the AUC Refresh...
Separate status information is provided for the file retrieval operation and the actual upgrade operation. The Auto Upgrade Configuration (AUC) Status menu status fields are defined in Table 5-51. Table 5-51. Auto Upgrade Configuration (AUC) Status Menu Status Fields Field Comp/Errs/Pend Last Action Status (Current or Last)
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Restore Factory Defaults Menu Restore Factory Defaults Main Menu\System Management\Restore Factory Defaults\ The Restore Factory Defaults menu (see factory defaults. This action is service affecting. If the system is accessed remotely through a static IP address, the system resets and access is lost.
Selection : '?' - System Help Screen Figure 5-53. Reset System Menu Table 5-54. Function This option reboots the Total Access 1248. All system options are retained. This option returns the display to the Management Menu” reboot. Menu Descriptions MM/DD/YY HH:MM “System...
TID: TA1248 Unacknowledged Alarms: None The Self Test menu (see Figure reboot of the Total Access 1248 system. If any tests result in a failed status, the word “ displays next to that test and the Access 1248 fans. 5-86 NOTE “Expansion Menu”...
EEPROM Test PASSED '?' - System Help Screen Figure 5-55. Self Test Menu Table 5-55. Table 5-55. Self Test Menu Option Function This option initiates the Total Access 1248 fan self test. Menu Descriptions MM/DD/YY HH:MM Shelf = Host 5-87...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice External Alarms Menu External Alarms Main Menu\System Management\External Alarms\ The External Alarms menu (see external alarms. The alarms can be assigned unique names and an associated severity level (refer to “External Alarm Severity Menu”...
This option is used to designate a major alarm. This option is used to designate a minor alarm. This option is used to designate a critical alarm to shutdown ADSL services. When Load shedding is engaged, power usage in the Total Access 1248 is reduced. NOTE Menu Descriptions...
Main Menu\System Management\Expansion\ The Expansion Menu (see Figure up to four Total Access 1248 units (one host and three clients). The expansion mode can only be enabled on the host units. TID: TA1248 Unacknowledged Alarms: None The Expansion Menu options are shown in Table 5-59.
Option Description T1/E1 Select T1/E1 Mode 61179641L4-5B Figure 5-59) is used to view T1 or E1 circuits, configure the IMA Total Access 1248 Network Port 1. T1 2. IMA 3. Select T1/E1 Mode Selection : '?' - System Help Screen Figure 5-59.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice T1 Main Menu T1 Main Menu Main Menu\Network Port\T1 Main Menu\ From the T1 Main Menu (see mance monitoring can be viewed. TID: TA1248 Unacknowledged Alarms: None The T1 Main Menu options are shown in...
Option Description T1 Provisioning T1 Status T1 Performance Test Restore T1 Factory Defaults SNMP/Menu Loopback Detection Inband Loopback Detection FDL Loopback Detection 61179641L4-5B Table 5-61. T1 Main Menu Options Function This option displays the 5-94. This option displays the This option displays the This option displays the 5-101.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice T1 Provisioning Menu T1 Provisioning Main Menu\Network Port\T1 Main Menu\T1 Provisioning\ The T1 Provisioning screen (see TID: TA1248 Unacknowledged Alarms: None The T1 Provisioning menu options are shown in...
Table 5-62. T1 Provisioning Menu Options Option Description Type Framing Line Code Line Build Out 61179641L4-5B T1 Function This field displays the T1 circuit type. This field displays the framing setting for the T1 circuit. Settings include the following: • SF •...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice T1 Status Menu T1 Status Main Menu\Network Port\T1 Main Menu\T1 Status\ The T1 Status menu (see Figure summary of the associated alarm counts. TID: TA1248 Unacknowledged Alarms: None Type...
Table 5-63. T1 Status Menu Options Option Field Type Framing Line Code Line Build Out T1 Alarm Total Alarms Red Total Alarms Yellow Total Alarms Blue Reset Alarm Counts 61179641L4-5B Function This field displays the T1 circuit type. This field displays the framing setting for the T1 circuit. For more information, see Table 5-62 This field displays the line code setting for the T1 circuit.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice T1 PM Main Menu T1 PM Main Menu\Network Port\T1 Main Menu\T1 PM\ The T1 PM Main Menu (see displays in 24-hour and 15-minute increments for the current port selected and to clear all T1 performance monitoring data.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-65. T1 Performance Monitoring Status Screen Codes (Continued) Code Definition CV-P Code Violations CV-L Code Violations ES-L Errored Seconds The T1 Performance Monitoring Status screen hot keys are defined in Table 5-66.
Line Loopback Local Loopback No Loopback Clear T1 Loopbacks On All Ports 61179641L4-5B Total Access 1248 T1 Test Menu for Port # 1 - No Loopback 1. Payload Loopback 2. Line Loopback 3. Local Loopback 4. No Loopback 5. Clear T1 Loopbacks On All Ports...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Restore T1 Factory Defaults Menu Restore T1 Factory Defaults Main Menu\Network Port\T1 Main Menu\Restore T1 Factory Defaults\ The Restore T1 Factory Defaults menu (see settings for all T1 ports.
E1 Status E1 Performance Test Restore E1 Factory Defaults 61179641L4-5B Figure 5-67), all E1 provisioning, status reporting and perfor- Total Access 1248 E1 Main Menu 1. E1 Provisioning 2. E1 Status 3. E1 Performance 4. Test 5. Restore E1 Factory Defaults...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice E1 Provisioning Menu E1 Provisioning Main Menu\Network Port\E1 Main Menu\E1 Provisioning\ The E1 Provisioning screen (see TID: TA1248 Unacknowledged Alarms: None The E1 Provisioning menu fields are shown in Table 5-70.
Line Code E1 Alarm Total Alarms Red Total Alarms Yellow Total Alarms Blue Reset Alarm Counts 61179641L4-5B 5-69) displays the status of the E1 network circuits and a Total Access 1248 E1 Status HDB3 HDB3 HDB3 HDB3 BLUE Cleared: 01/15/94 05:19:17...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice E1 PM Main Menu E1 PM Main Menu Main Menu\Network Port\E1 Main Menu\E1 PM Main Menu\ The E1 PM Main Menu (see displays in 24-hour and 15-minute increments for the current port selected and to clear all E1 performance monitoring data.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-73. E1 Performance Monitoring Status Screen Codes (Continued) Code Definition CV-P Code Violations CV-L Code Violations ES-L Errored Seconds The E1 Performance Monitoring Status screen hot keys are defined in Table 5-74.
Line Loopback Local Loopback No Loopback Clear E1 Loopbacks On All Ports 61179641L4-5B Total Access 1248 E1 Test Menu for Port # 1 - No Loopback 1. Payload Loopback 2. Line Loopback 3. Local Loopback 4. No Loopback 5. Clear E1 Loopbacks On All Ports...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Restore E1 Factory Defaults Menu Restore E1 Factory Defaults Main Menu\Network Port\E1 Main Menu\Restore E1 Factory Defaults\ The Restore E1 Factory Defaults menu (see settings for all E1 ports.
IMA Main Menu Main Menu\Network Port\IMA Main Menu\ The Total Access 1248 system is fed by virtual circuits using IMA. The IMA Main menu (see Figure 5-74) is the central point for managing and provisioning the Total Access 1248 IMA related options.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice IMA Configuration Screen IMA Configuration Screen Main Menu\Network Port\IMA Main Menu\IMA Configuration Screen\ The IMA Configuration screen (see Link type. This screen is informational only. TID: TA1248 Unacknowledged Alarms: None Figure 5-75.
IMA Group Shortcut Setup Scrambler Restore IMA Factory Defaults 61179641L4-5B Figure 5-76) is used to provision and maintain IMA functions. Total Access 1248 IMA Provisioning 1. IMA Facility 2. IMA Group 3. Shortcut Setup 4. Scrambler 5. Restore IMA Factory Defaults...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice IMA Facility Provisioning Menu IMA Facility Provisioning Main Menu\Network Port\IMA Main Menu\IMA The IMA Facility Provisioning menu (see a per facility basis. TID: TA1248 Unacknowledged Alarms: None Figure 5-77. IMA Facility Provisioning Menu The IMA Facility Provisioning menu options are shown in Table 5-79.
RX ATM Address TX Group TX Link ID TX ATM Address 61179641L4-5B Provisioning\IMA All Facilities Provisioning\ Figure 5-78) provides a summary of all the IMA Total Access 1248 IMA All Facilities Provisioning Fac2 Fac3 Fac4 Fac5 '?' - System Help Screen Description This field displays the operation mode for the IMA facility.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Operation Mode for Facility Menu Operation Mode for Facility Main Menu\Network Port\IMA Main Menu\IMA Provisioning\IMA Facility Provisioning\IMA All Facilities Mode for Facility\ The Operation Mode for Facility menu (see mode for each IMA facility.
61179641L4-5B Provisioning\IMA Group Provisioning\ Figure 5-80) is used to provision the IMA Group. An NOTE Total Access 1248 IMA Group Provisioning 1. Group Operation Mode 2. IMA Transmit ID (0-255) 3. IMA TX Frame Length 4. Min. TX Active Links 5.
Page 170
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-82. IMA Group Provisioning Menu Options (Continued) Option Description IMA Transmit ID IMA TX Frame Length Min. TX Active Links Min. RX Active Links Max. Link Diff. Delay...
Group 1 61179641L4-5B Provisioning\IMA Shortcut Setup\ Figure 5-81) provides shortcuts to facilitate provisioning Total Access 1248 IMA Shortcut Setup 1. Force All Facilities Into Unassigned 2. Force Facility - 1 Into Pass Through 3. Force All Facilities Into IMA Group 1...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice IMA Scrambler Menu IMA Scrambler Main Menu\Network Port\IMA Main Menu\IMA The IMA Scrambler menu (see bling is designed to randomize the pattern of 1s and 0s carried in ATM cells. Randomizing the digital bits can prevent continuous, non-variable bit patterns (i.e., long strings of all 1s or all...
Yes - Service Affecting 61179641L4-5B Provisioning\Restore IMA Factory Defaults\ Figure 5-83) is used to reset the IMA provisioning CAUTION Total Access 1248 Restore IMA Factory Defaults 1. Yes - Service Affecting Selection : '?' - System Help Screen Table Function This option restores all options to the IMA factory default settings.
Main Menu\Network Port\IMA Main Menu\Status/Failure Monitoring\ The Total Access 1248 system tracks Failure Monitoring (FM) for the IMA group and each of the links. The Status/Failure Monitoring menu (see display information about transmitting and receiving states, receiving failure, relative delay, receiving Loss of IMA Framing (LIF) defect, receiving Link Out of Delay Synchronization (LODS), receiving defect, and the receiving link identifier for all facilities.
Active Tx Links Configured RX Links 61179641L4-5B Monitoring\IMA Group 1 Failure Monitoring Status\ Figure failure status. Far End Total Access 1248 IMA Group 1 Failure Monitoring Status NE Group State : Operational FE Group State : Operational NE Failure Status...
Page 176
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-87. IMA Group 1 Failure Monitoring Status Screen Fields (Continued) Field Active Rx Links FE Failure Data FE Frame Length Group Version Timing Source Last Timing Source Change...
NotInGr Not In Group, Unassigned Deleted Not In Group, Deleted Fault Unusable, Fault No Reas Unusable 61179641L4-5B Monitoring\IMA Link Failure Monitoring Status\ Figure Total Access 1248 IMA Link Failure Monitoring Status Fac2 Fac3 Fac4 Fac5 Active Active Active Active Active...
Page 178
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-88. IMA Link Failure Monitoring Status Screen States and Failure Conditions (Continued) State Definition Usable Usable Active Active Near End Rx States NotInGr Not In Group, Unassigned Deleted...
Page 179
Table 5-88. IMA Link Failure Monitoring Status Screen States and Failure Conditions (Continued) State Definition Deleted Not In Group, Deleted Fault Unusable, Fault Misconn Unusable, Mis-connected Inhibit Unusable, Inhibited Usable Usable Active Active Far End Rx States NotInGr Not In Group, Unassigned Deleted Not In Group, Deleted Failed...
Page 180
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-88. IMA Link Failure Monitoring Status Screen States and Failure Conditions (Continued) State Definition Usable Usable Active Active Near End and Far End Rx Failure Failure Failure Loss of IMA Framing...
ATM Lpbk Towards Network ATM Lpbk Towards Customer 61179641L4-5B Figure 5-87) is used to initiate loopbacks for testing the IMA Total Access 1248 IMA Loopback Menu 1. Data Lpbk Towards Network 2. ATM Lpbk Towards Network 3. ATM Lpbk Towards Customer...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice IMA Performance Monitoring Menu IMA Performance Monitoring Main Menu\Network Port\IMA Main Menu\IMA Performance Monitoring\ The IMA Performance Monitoring menu (see 1248 system performance statistics for the IMA groups. TID: TA1248 Unacknowledged Alarms: None Figure 5-88.
TIIS TxAvail RxAvail 61179641L4-5B Monitoring\IMA Group 1 Performance Monitoring Status\ NOTE . All statistics are cleared without additional Total Access 1248 Group 1 Performance Monitoring Status TIIS TxAvail RxAvail 11750 11750 F - Forward(2hrs/15min PM) '?' - System Help Screen Description This field displays the Time In Interval Seconds.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice The IMA Group 1 Performance Monitoring Status screen hot keys are defined in Table 5-92. IMA Group 1 Performance Monitoring Status Screen Hot Keys Hot Key Description Backward (2hrs/15min PM)
Field TxUS RxUS TxFail RxFail The IMA Facilities hot keys are defined in 61179641L4-5B Monitoring\IMA Performance Monitoring Status Facility 1 Near End PM Total Access 1248 TxUS RxUS TxFail 11785 11784 11784 F - Forward(2hrs/15min PM) P - Previous Port...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-94. IMA Performance Monitoring Status Hot Keys Hot Key Description Backward (2hrs/15min PM) Clear PM Stats Forward (2hrs/15min PM) Previous Port Next Port Select Port Near/Far End PM...
The T1/E1 menu (see Figure TID: TA1248 Unacknowledged Alarms: None 61179641L4-5B 5-91) is used to specify either a T1 or E1 interface. Total Access 1248 T1/E1 1. T1 2. E1 Selection : '?' - System Help Screen Figure 5-91. T1/E1 Menu...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice DSL Menus DSL Menus Main Menu\DSL Menus\ Each of the 48 DSL lines has a number of settings that can be provisioned. These settings affect the performance of the line. The class of service to be provisioned on the line and the type of modem at the distant end must be considered.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice ADSL Profiles Menu ADSL Profiles Main Menu\DSL Menus\DSL Provisioning\ADSL Profiles\ The ADSL Profiles menu (see the same time. At initial setup, all lines are set to the default values using the “DEFVAL”...
Table 5-98. Edit ADSL Profile Menu Options Option Description State Host Client 1 Client 2 61179641L4-5B NOTE Total Access 1248 Custom Name 7. Line Type: Upstream 16. Target SNR Margin 17. Max SNR Margin 18. Min SNR Margin 8160 kbps 19.
Page 192
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-98. Edit ADSL Profile Menu Options (Continued) Option Description Client 3 Rate Mode Line Type Downstream Options Target SNR Margin Max SNR Margin Min SNR Margin Fast Channel...
Page 193
Table 5-98. Edit ADSL Profile Menu Options (Continued) Option Description Upstream Options Target SNR Margin Max SNR Margin Min SNR Margin Fast Channel Max Tx Rate Fast Channel Tx Rate Interleave Channel Max Tx Rate Interleave Channel Min Tx Rate Interleave Channel Max Delay...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Alarm Profiles Menu Alarm Profiles Main Menu\DSL Menus\DSL Provisioning\Alarm Profiles\ Alarm options for the DSL lines are completed by setting up profiles using the Alarm Profiles menu (see Figure 5-96).
Option Description State Host Client 1 Client 2 Client 3 LOS Secs (Downstream) ES Secs (Downstream) 61179641L4-5B Total Access 1248 Custom Name Upstream Disabled 8. LOS Secs Disabled 9. ES Secs Selection : '?' - System Help Screen Function This option is used to assign a state to the profile.
Page 196
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-99. Profile Settings for: Custom Name Menu Options (Continued) Option Description LOS Secs (Upstream) ES Secs (Upstream) 5-144 Function The Loss of Signal Seconds (LOS Secs) option is used to configure upstream traffic.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice TID: TA1248 Unacknowledged Alarms: None Figure 5-99. Port Provisioning Menu The Port Provisioning options are as shown in Table 5-100. Port Provisioning Menu Options Option Description Select Port ADSL Card Service State...
The ADSL Card Service State option on the for ADSL Card menu, which refers to the ADSL card that is located on the main circuit board of the Total Access 1248 system. The Service State for ADSL Card menu options are shown in Table 5-101.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Service Mode for Port: # Menu Service Mode for Port: # Main Menu\DSL Menus\DSL Provisioning\Port The Service Mode option on the menu. The # represents the value displayed for the Select Port option. The service mode refers to the data mode for the traffic between the DSLAM and the modem.
This option enables hamband masking. This option disables hamband masking. Provisioning\Cabinet Mode for Port: #\ Port Provisioning Menu displays the Cabinet Mode for Port: # Total Access 1248 Cabinet Mode For Port:1 1. Disabled 2. Enabled - (Tone 250) 3. Enabled - (Tone 110) 4.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Link Down Alarm for Port: # Menu Link Down Alarm for Port: # Main Menu\DSL Menus\DSL Provisioning\Port The Link Down Alarm option on the Port: # menu. The # represents the value displayed for the Select Port option. The Link Down Alarm option is used to enable and disable link down alarms.
Description ADSL Provisioning Restore DSP Management Menu 61179641L4-5B Figure 5-101) provides options to restore all ADSL provisioning Total Access 1248 ADSL Restore Menu 1. ADSL Provisioning Restore 2. DSP Management Menu Selection : '?' - System Help Screen Figure 5-101. ADSL Restore Menu Table 5-107.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice DSP Management Menu DSP Management Menu Main Menu\DSL Menus\DSL Provisioning\ADSL Restore If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see host or client unit must be chosen in order to access the DSP Management menu.
Reset DSPs without reloading firmware Auto Warm Start Retrain Criteria Exit 61179641L4-5B Total Access 1248 DSP Management Menu 1. Reset All DSPs and reload firmware 2. Reset DSPs without reloading firmware 3. Auto Warm Start ENABLED 4. Retrain Criteria 5.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Reset DSP Menu Reset DSP Main Menu\DSL Menus\DSL Provisioning\ADSL Restore Menu\DSP Management The Reset DSP Menu (see Figure eight ports as listed in the menu commentary when a DSP is selected.
Retrain Margin FE 61179641L4-5B Menu\ADSL Retrain Criteria\ Figure 5-105) is used to select the conditions that will Total Access 1248 ADSL Retrain Criteria - Port: 1 1. Retrain Margin NE 2. Retrain Margin FE 3. Retrain UAS-LNE 4. Retrain UAS-LFE 5.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-110. ADSL Retrain Criteria Menu Options (Continued) Option Description Retrain UAS-LNE Retrain UAS-LFE Retrain SES-FE The ADSL Retrain Criteria menu hot keys are defined in Table 5-111. ADSL Retrain Criteria Menu Hot Keys...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice TID: TA1248 Unacknowledged Alarms: None The Status menu options are as shown in Option Description ADSL Status All ADSL Ports Status ATU-R Information BAT/SNR Tables 5-158 Total Access 1248 Status 1.
Line Type Line Rate Margin Power Attenuation Max Rate Actual Delay Relative Cap S - Select Port 61179641L4-5B Total Access 1248 Line 17 ADSL Status T1.413 Rate Adaptive Fast Downstream 8128 kbps 9.5 dB 6.1 dBm 0.0 dB 10136 kbps 0.0 ms...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice ADSL Ports Status Screen ADSL Ports Status Main Menu\DSL Menus\Status\ADSL Ports Status\ An example of the report returned from selecting the ALL ADSL Ports Status option is shown Figure 5-109.
TID: TA1248 Unacknowledged Alarms: None S - Select Port Figure 5-110. ATU-R Information Screen 61179641L4-5B Figure 5-110) provides information for the remote end of Total Access 1248 Line 17 ATU-R Information Link Status T1.413 Vendor ID Provider Code Version Number...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Bit Allocation Table - Link Up Screen Bit Allocation Table - Link Up Screen Main Menu\DSL Menus\Status\Bit Allocation Table - Link Up Screen\ The Bit Allocation Table - Link Up screen (see each of the tones in the ADSL signal.
Performance menu. TID: TA1248 Unacknowledged Alarms: None The Total Access 1248 provides displays to help analyze performance of the system. This information is available in displays of 15-minute and daily intervals. Performance menu options. 5-164...
S - Select Port Figure 5-116. Current 15 Minute Performance Screen The Performance Monitoring Status screen fields are as shown in 61179641L4-5B Total Access 1248 Performance 1. Display PM for Current Port 2. Clear All PM for All Ports Selection : '?' - System Help Screen Figure 5-115.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 5-113. Performance Monitoring Status Screen Fields Field The Performance Monitoring Status screen hot keys are defined in Table 5-114. Performance Monitoring Status Screen Hot Keys Hot Key Description...
DELT functionality requires a service mode that supports DELT on both units. 61179641L4-5B NOTE Figure Total Access 1248 Select Shelf 1. Host 2. Client 1 (configured) 3. Client 2 (configured) 4. Client 3 (configured)
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice TID: TA1248 Unacknowledged Alarms: None Current ADSL ServiceMode/Port Status =ADSL1 DELT Functionality requires a service mode that supports DELT on both units 1. Port 2. Activate DELT 3. Terminate Test 4.
System Alarm Log Screen System Alarm Log Main Menu\System Alarm Log\ The Total Access 1248 system provides a system alarm log for monitoring alarms. To view the System Alarm Log screen (see press NTER TID: TA1248 Unacknowledged Alarms: None System Alarm Log...
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice System Event Log Screen System Event Log Main Menu\System Event Log\ The System Event Log screen (see events. TID: TA1248 Unacknowledged Alarms: None System Event Log Date Time 1 MM/DD/YY...
Table 5-117. System Event Log Hot Keys Hot Key Description Date/Time First Login Last Next Account Previous S/W Updates Time Ascending View Security 61179641L4-5B Function This hot key is used to display all events. This hot key is used to display date/time events. This hot key is used to display the first page of events.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Contact Information Screen Contact Information Main Menu\Contact Information\ The Contact Information screen (see repair, and online support contact information. TID: TA1248 Unacknowledged Alarms: None Figure 5-121. Contact Information Screen...
OK 0 < Table 5-118 lists the TL1 commands supported by the Total Access 1248 system. For further details of the TL1 commands, refer to the Total Access 11xx and 12xx ADSL2+ DSLAM TL1 Command Reference Guide (P/N 61179611L1-35). 61179641L4-5B Figure 5-122.
Fan Modules Four fans are installed in the Total Access 1248 in a removable module to maintain the hardware within proper operating temperature tolerances. With the exception of the filter, the fan module is not field serviceable. The fan module (P/N 1179675L1) is field replaceable and is available from ADTRAN.
2. Tighten the screw that holds the fan module in place. Fan Filters The Total Access 1248 Expansion DSLAM fan module comes with a single fan filter. The filter is designed to remove particles from the air before it is pushed through the system.
SNMP/TFTP AND TL1 CONFIGURATION STORAGE AND RETRIEVAL Use the following SNMP/TFTP and TL1 commands to store or retrieve the Total Access 1248 System Configuration Archive (SCA) file. In some installations, the configuration file can be stored and retrieved in one operation for multiple Total Access 1248 systems.
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice When accessing the Total Access 1248 via TL1, the Save and Restore commands are used to save or retrieve the SCA file. Save Use: ED-PROV-TFTP:::::FILENAME=<filename>,TFTPIPADDR=<ip_addr>,SET; Restore Use: ED-PROV-TFTP:::::FILENAME=<filename>,TFTPIPADDR=<ip_addr>,GET; TL1 commands are also executable from the Total Access 1248 Main Menu.
INTRODUCTION Specifications for the Total Access 1248 are detailed in Table 7-1. Total Access 1248 Specifications Specifications Number of Pairs (ADSL + POTS): Downstream Data Rate: Upstream Data Rate: ADSL Service Range: Operating Voltage Range: Nominal Operating Voltage 61179641L4-5B Section 7...
Page 232
Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Table 7-1. Total Access 1248 Specifications (Continued) Specifications Total Access 1248 Octal T1 IMA DSLAM: Replacement Filter Pack (Quantity 20): Note: Current draw calculated with 8 kft. copper line and maximum data rate of 8160 kbps in G.DMT mode with four cooling fans active (0.021 amps/fan).
Appendix A Warranty WARRANTY AND CUSTOMER SERVICE ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. Refer to the following subsections for sales, support, Customer and Product Service (CAPS) requests, or further information.
Page 234
® Carrier Networks Division 901 Explorer Blvd. Huntsville, AL 35806...