Single System; Multiple Systems; Automatic Frequency Scan; Channel Scan - Shure ULX Manual

Single System

If you encounter wireless interference, perform a channel scan on the receiver and use the selected channel. You usually do
not need to change the group.

Multiple Systems

To maximize performance, set all wireless systems to different channels from the same group. These channels are selected to
work well together.
Follow these steps when using group and channel scan with multiple systems.
1. Power off all system transmitters. Turn on all other wireless or digital devices as they would be during the performance
or presentation.
2. On the first receiver: Perform a group scan. Note the selected group, then use channel scan to find the first open
channel in that group.
3. Power on the first transmitter and set it to the selected group and channel.
4. IMPORTANT: Leave the first transmitter powered on while setting up the next system.
5. For each additional system: Set to the same group as the first. Perform a channel scan and set the receiver and
transmitter to the selected channel.
6. Leave each transmitter on while setting up additional systems.
Note:
• Keep each transmitter at least two meters (6 feet) apart.
• If using systems from different bands, set up all systems from the same band together.
Tip: To reduce setup time, you can manually set up the group and channels before arriving at the venue. Visit www.shure.com for a list of groups and channels
that are anticipated to be free of interference in a particular city or region.

Automatic Frequency Scan

Channel Scan

This feature scans for an open channel in the selected group.
Shure Incorporated
12/31