Squelch (Ulxp4 Only); Audio Output; Audio Output Connectors - Shure ULX Manual

Hide thumbs Also See for ULX:

Table of Contents

Shure Incorporated

Note: The unit must remain in Master List mode to operate at the selected frequency.

Exit Master List mode by holding the SET button for 10 seconds.

Squelch (ULXP4 Only)

The factory setting offers the optimum performance for most installations.

Increasing squelch filters out all but the highest quality signal, but this decreases operating range. Decreasing squelch extends

the operating range, but can increase signal noise.

Balanced XLR: Connect to a mixer or other professional audio input. Use the MIC/LINE switch to adjust for microphone or

line-level inputs.

Unbalanced 6.35 mm (1/4"): Connect to high impedance inputs, such as a guitar amplifier.

Note: The LINE/MIC switch does not affect the 6.35 mm (1/4") jack.

16/31

Table of Contents