Sony STR-DA2800ES Service Manual page 6

STR-DA2800ES
ADVANCE PREPARATION OF REPAIR
This unit can perform "PRO-UPGRADE" by C4 (Control4) dealer.
When the user is performing "PRO-UPGRADE", GUI of C4
(Control4) world is displayed.
Display GUI in the following procedure and confi rm the state of
displayed GUI.
Connection:
HDMI cable
STR-
DA2800ES
D-VIDEO board
HDMI OUT A ARC connector
(CN3502)
Procedure:
1. Press the [ ] button to turn on the main power.
?/1
2. Press the [HOME] button of remote commander.
3. "PRO-UPGRADE" is not performed when the following
screen is displayed.
Note: If the following processing is performed to this unit by which
"PRO-UPGRADE" was performed, this unit returns to the state
before "PRO-UPGRADE" is performed.
• Complete NETWORK board replacing
• Factory reset
Since the change to C4 (Control4) world can perform only by
C4 (Control4) dealer, fully work carefully.
NOTE OF REPLACING THE COMPLETE NETWORK
BOARD
When the complete NETWORK board is exchanged, the MAC ad-
dress has been changed.
Please print and cut out the following explanations, and return it
with the unit that completes the repair.
MAC address of this receiver has been changed by this repair.
The customer who uses the MAC address fi ltering function of
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the System Information screen
of this unit. Please refer to "Adjusting Settings" on the operating
instructions for details.
6
monitor
CONFIRMATION OF NETWORK OPERATION
Note: When this confi rmation is executed, IP address is changed.
Necessary machinery and materials:
• PC (Windows XP/Vista)
• Router
(Transmission rate is 100 Mbps or more, built-in DHCP server
function)
• Two LAN cables
(Category 5 cable, normal type or shield type)
• Monitor
• Supplied remote commander (RM-AAU155)
Connection:
(The router need not be connected with the internet)
LAN cable
PC router
NETWORK board
jack (CN2502)
Procedure:
1. The setting of LAN of PC is setting to the automatic IP address
assignment.
It changes to the setting that displays the image in the monitor.
2. Perform connection with reference to connection fi gure.
3. The power supply of the router is turn on, next, the power sup-
ply of PC and this unit is turn on.
4. Press the [HOME] button of the remote commander, the home
menu is displayed in the monitor.
5. The "Settings" is selected on the home menu, and press the [ ]
button of remote commander.
6. The "Network Settings" is selected , and press the [ ] button
of remote commander.
7. The "Internet Settings" is selected , and press the [ ] button of
remote commander.
8. The "Network Setup" is selected , and press the [ ] button of
remote commander.
9. The "Auto" is selected , and press the [ ] button of remote
commander.
10. The "The network will be confi gured with the following set-
tings." is displayed, and press the [
mander.
11. The "Save & Connect" is selected , and press the [ ] button of
remote commander.
12. The automatically connect function is performed.
13. Confi rm that the "Internet Access: OK" has been displayed,
and press the [ ] button of remote commander.
14. Press the [\/1] button to turn off the main power.
HDMI cable
STR-
monitor
DA2800ES
D-VIDEO board
HDMI OUT A ARC connector
(CN3502)
] button of remote com-
,