Sony STR-DA2800ES Service Manual page 39

SPECIAL MENU MODE
Various version displays of system, update, test, etc. can be performed.
Setting method:
1. Press the [ ] button to turn on the main power.
?/1
2. While pressing the [TONE MODE] button, press the [A.F.D.], [2CH/A. DIRECT], [MUSIC], [MOVIE/HD-D.C.S.] button in order, the
message "SPECIALIZED" appears.
3. Press the [AMP MENU] button of the remote commander, the message "< SPECIAL >" appears.
4. Press the [ ] button of the remote commander, the item is appears.
,
5. Each time the [ ] or [ ] buttons of the remote commander is pressed, the item is switched in order of "Display of special menu mode".
M m
Some items can change the content. Display the cursor by pressing the [
by pressing the [ ] or [ ] buttons of the remote commander, and fi x the content by pressing the [
M m
when you want to change the content of the item.
Releasing method:
To release from this mode, while pressing the [TONE MODE] button, press the [A.F.D.], [2CH/A. DIRECT], [MUSIC], [MOVIE/HD-
D.C.S.] button in order again, the message "MENU SPECIALIZE OFF" appears, and this mode is released.
Display of special menu mode:
Items
SYSTEM version display
MAIN Ucom version display
SUB Ucom version display
FAROUDJA version display
DSP serial fl ash version display
Network processor version display
IR learning Ucom version display
DSP debug menu
Network debug menu
MAC address display
(Network debug menu)
External control on/off
(Network debug menu)
Network standby on/off
(Network debug menu)
Network audio signal path switch
(Network debug menu)
DAC error signal invalidity
(Network debug menu)
Network compulsive party mode
(Network debug menu)
MT8555 USB update
C4 identify
Home automation on/off
RS232C select
Display
SYS. vX.XXX
M. A28 vX. XX
SUB CCvX.XX
VIDEO vX. XX
SFLASHvX. XX
NET vRXXXX
IR vXXXXXX
<DSP.DEBUG>
<NET.DEBUG>
MAC XX:XX >
EXT CTRL
NET STBY
AUD ROUTE?
IGN DA-ERR
FORCEPARTY
USB UPDATE
C4 ID
HAT
232C SEL
] button of the remote commander, and changing the content
,
<
Remark
X.XXX: System software version
X.XX: Main system controller software version
X.XX: Sub system controller software version
X.XX: Video system controller software version (main)
X.XX: DSP serial fl ash software version
XXXX: Network processor fi rmware version
XXXX: IR controller software version
Not used for the servicing.
Menu mode to enter MAC address display. If the [,] button
of the remote commander is pressed, entering the menu, and
operating the following menu become possible.
XX:XX: MAC address
When [,] button on the remote commander is pressed, the
continuation of the MAC address is displayed.
Not used for the servicing.
Not used for the servicing.
Not used for the servicing.
Not used for the servicing.
Not used for the servicing.
If the [ ] button of the remote commander is pressed, update
of the network processor is started.
Not used for the servicing.
Not used for the servicing.
Not used for the servicing.
STR-DA2800ES
] button of the remote commander
39