Slip Ring Assembly Replacement - Sony DVW-250 Maintenance Manual

6-3. Slip Ring Assembly Replacement

6-3. Slip Ring Assembly Replacement
Overviews
Brush cover removal
Brush assembly removal
Slip ring assembly removal
Slip ring assembly installation
Brush assembly installation
Brush cover installation
Cautions
If the slip ring worn out, replace the slip ring assembly. Once the slip ring assembly
replaced, the adjustment is not required.
Never clean on the surface of the slip ring assembly using a cleaning piece moist-
ened with cleaning fluid.
Preparations
1. Turn off the power.
2. Remove the top panel. (Refer to "1-5. Removal/Installation of Cabinet".)
n
The brush assembly can replace when the cassette compartment attaches to the unit.
Tools
• Torque screwdriver bit (for M2): J-6325-380-A
• Torque screwdriver (for 3 kg) : J-6325-400-A
Removal
1. Brush cover removal
Remove the brush cover. (Refer to "6-2. Brush
Replacement".)
2. Brush assembly removal
Remove the brush assembly. (Refer to "6-2.
Brush Replacement".)
6-12
DVW-250/250P