Table of Contents
Advertisement
3-2. DIAG Menu
The DVW-250/250P has the DIAG menu required for the adjustment and diagnostics.
This menu has the tree structure.
Enclose the PAGE in angle bracket on the audio meter LCD.
When adjust servo or RF using the DIAG menu, turn S151-1 (F-1) switch on SST-3 board to ON.
Operation
1. Activate the DIAG menu
Push the DIAG button to activate the DIAG menu.
2. Selection of PAGE
Select the PAGE by pressing the UP or DOWN button. (Align the asterisk cursor.)
Press the SET button.
Repeat selection of PAGE until the ITEM is found.
3. Selection of ITEM
Select the ITEM by pressing the UP or DOWN button. (Align the asterisk cursor.)
Press the SET button.
Blinking the setting data.
4. Setting of the ITEM
Change the setting data by pressing the UP or DOWN button.
Press the SET button when the changing data is written.
Press the DISPLAY button when return to the initial data.
5. Exit the DIAG menu
Press the DIAG button.
DVW-250/250P
3-2. DIAG Menu
3-5
Advertisement
Table of Contents
