Using Your Steam Mop - Shark S1000EU Instructions Manual

USING YOUR STEAM MOP

IMPORTANT: DO NOT
scrub any one area for
an extended period
of time.
IMPORTANT: Before
you fill up the tank,
make sure your Steam
Mop is unplugged from
the electrical socket.
IMPORTANT: Make
sure you DO NOT
use the Steam Mop
without first attaching
a Dirt Grip
™ pad and
filling the tank
with water.
NOTE: To prolong the
life of your Steam Mop,
we recommend using
distilled water.
NOTE: Sweep or vacuum
your floors prior to
cleaning with your
Steam Mop.
NOTE: Please wait 2 to
3 minutes for the Steam
Mop to cool off before
removing the Dirt Grip
1 To remove the tank,
pad. NEVER leave the
lift it up and away
Steam Mop with a damp
from the Steam Mop
or wet Dirt Grip pad on
body. Make sure to
any floor for an extended
unplug the Steam Mop
period of time.
before removing the
water tank.
36
0800 000 9063
STEP 1 STEP 2
2 To remove the water
tank cap, twist
counterclockwise. Fill
tank completely with
distilled water or
tap water.
STEP 3
3 Replace cap on water tank and turn
cap clockwise to seal.
STEP 4
4 To replace the water tank, align it so
the cap faces down. Place the cap
into the hole in the Steam Mop body
and slide tank down until it clicks
securely into place.
s h a r kc l e a n . e u
37