14 DO NOT put any objects into openings. Do not 28 To avoid circuit overload, do not operate another use with any opening that is blocked. appliance on the same socket (circuit) as the WHEN USING YOUR SHARK STEAM MOP, WARNING: ®...
Page 3
Using Your Light & Easy Steam Mop ..............8 ™ This marking indicates that this product should not be disposed with other household wastes Shark Light & ® Care of Your Light & Easy ™ Steam Mop ..............11 throughout the EU.
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark ® Light & Easy ™...
Page 5
Getting Started Using Your Light & Easy Steam Mop ™ Your microfibre cleaning pads should be replaced Calcium and mineral deposits can build up and every 3 months to maximize cleaning performance. impact the performance of your steam mop over time. To extend the life of your product we When you use your steam mop for the first time or recommend that you use distilled water.
Page 6
11 fig. 9 Wait 30 seconds for the boiler to heat the water. Mop with a forward and backward motion to AFTER USE AND STORAGE To store the cooled Shark Light & Easy Steam ® ™ customize steam output automatically. (fig. 9) Mop, hang on a large hook.
Care of Your Light & Easy Steam Mop Trouble Shooting ™ PROBLEM POSSIBLE REASONS & SOLUTIONS Your steam mop should be securely plugged into an electrical outlet only. The Light & Easy Steam Mop ™ will not turn-on. Check your fuse or breaker. Light &...