Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the
Internet. Click Save at any time to save the changes you have made on this page.
Create a new PPPoE session.
PPPoE Session
Enter the username provided by your ISP.
Username
Enter the password provided by your ISP.
Password
Select either Dynamic IP or Static IP.
Address Mode
Configurable if Static IP is chosen. Enter the IP address
IP Address
provided by your ISP.
Enter the ISP service name (optional).
Service Name
Select either Always On or Manual.
Reconnect Mode
Maximum Transmission Unit - you may need to change the
MTU
MTU for optimal performance with your ISP.
D-Link COVR-1900 User Manual
IPv6 - PPPoE
47