D-Link COVR-1900 User Manual page 79

Section 3 - Configuration
If you clicked on Edit or Add Rule, the following options will appear:
Enter a name for the rule. Alternatively, select the protocol/
Name
Application Name from the drop-down menu.
Enter the IP address of the computer on your local network
Local IP
that you want to allow the incoming service to. Alternatively,
select the device from the drop-down menu.
Select the protocol of the traffic to allow or deny (TCP, UDP,
Protocol
Both, or Other).
If you entered Other above, enter the protocol number.
Protocol Number
Enter the public port you want to open.
External Port
Enter the private port you want to open.
Internal Port
Use the drop-down menu to select the time schedule that
Schedule
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 83 for more information.
D-Link COVR-1900 User Manual 75