System Admin - System - D-Link COVR-1900 User Manual

Section 3 - Configuration
In the Management menu on the bar at the top of the page, click System Admin to access the Admin page, then click
System. This page allows you to save the router's current configuration, load a previously saved configuration, reset the
router to its factory default settings, or reboot the router.
To configure the Admin settings, click the Admin link. Refer to System Admin - Admin on page 86
Click Save at any time to save the changes you have made on this page.
This option will save the current router configuration settings
Save Settings to Local
to a file on your computer.
Hard Drive
This option will load a previously saved router configuration
Load Settings from
file. This will overwrite the router's current configuration.
Local Hard Drive
This option will restore the router back to the default
Restore to Factory
configurations stored in the firmware. Any settings that have
Default Settings
not been saved will be lost, including any rules that you have
created. If you want to save the current router configuration
settings, use the Save Settings To Local Hard Drive button
above.
Auto Reboot Configuration
Click to reboot the router immediately.
Reboot the Device
You may set the router to automatically reboot at a set time.
Auto Reboot
The options are Never, Daily, or Weekly. You may set the
hour, the minute, and the day you wish to have the router
automatically reboot at.
D-Link COVR-1900 User Manual

System Admin - System

System
87