Network - D-Link COVR-1900 User Manual

Section 3 - Configuration
In the Settings menu on the bar at the top of the page, click Network to change the local network settings of the router and
to configure the DHCP settings.
Click Save at any time to save the changes you have made on this page.
Enter the IP address of the router. The default IP address is
LAN IP Address
192.168.0.1. If you change the IP address, once you click Save,
you will need to enter the new IP address in your browser to
get back into the configuration utility.
Enter the subnet mask of the router. The default subnet mask
Subnet Mask
is 255.255.255.0.
The default address to access the router's configuration is
Management Link
http://dlinkrouter.local/. You can replace dlinkrouter with
a name of your choice.
Enter the domain name (optional).
Local Domain Name
Disable to transfer the DNS server information from your ISP
Enable DNS Relay
to your computers. If enabled, your computers will use the
router for a DNS server.
D-Link COVR-1900 User Manual

Network

Network Settings
62