Wireless - D-Link COVR-1900 User Manual

Section 3 - Configuration
In the Settings menu on the bar at the top of the page, click Wireless to see your wireless network settings for your
COVR-1900.
Click Save at any time to save the changes you have made on this page.
Enable or disable the Smart Connect Feature. When enabled,
Status
only a few configuration options are available to simplify
configuration.
If Smart Connect is Status is Enabled:
Create a name for your wireless network using up to 32
Wi-Fi Name (SSID)
characters.
Create a password to use for wireless security. Wireless clients
Password
will need to enter this password to successfully connect to
the network.
Wireless - Advanced Settings...
Choose None, WPA/WPA2-Personal (recommended) or
Security Mode
WPA3-Personal.
Select the desired wireless transmission power.
Transmission Power
Use the drop-down menu to select the time schedule that
Schedule
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 83 for more information.
D-Link COVR-1900 User Manual

Wireless

Smart Connect
Wireless
56