Table of Contents
Advertisement
4) Setup [Operating System] as follows:
- Delay: 0:00:00
- Duration: 0:01:30
5) Click [Next] to save it
6) Click [Finish] to close shutdown sequence
Power Failure
1) Click [Server Shutdown] -> [Power Failure]
Setup as follows:
When power fails, begin a shutdown
procedure:
At runtime limit
When power returns, reboot UPS:
Put a check and enter a percentage & time on
[After the following occurs:]
Battery charges to 0 %
And the elapsed time is 60 seconds
2) Click [Apply] to save it
Confirm Shutdown Type
1) Click [Server Shutdown] -> [Shutdown Type]
Put a check on: Shutdown
2) Click [Apply] -> [Close]
47
S2E-17-0056_A
Advertisement
Table of Contents
