Table of Contents
Advertisement
2) Put a check on [Show advanced items] to indicate more items trees.
3) Click [Power Parameter] Setup the power settings:
High-Transfer Voltage: 265
Low-Transfer Voltage: 196
Sensitivity: High
Nominal Output Voltage: 220
Audible Warning: On Battery
Shutdown Sequence
1) Click [Server Shutdown] -> [Shutdown Sequence]
Setup the shutdown sequence:
Command File: Not Enabled Operating System:
- Delay [mins]: 0:00
- Duration [mins]: 1:30
Click [Apply] if anything changed.
2) Click
"Configure Shutdown
3) Without checking to any items, click [Next]
Sequence"
46
S2E-17-0056_A
Advertisement
Table of Contents
