Table of Contents
Advertisement
Onboard Peripherals
The "Onboard Peripherals" menu allows you to configure the
onboard devices. Selecting this option from the main menu displays
the following screen:The following table describes the parameters
Serial Port 1 -------------------[Enabled ]
Base Address -----------------[3F8h]
IRQ --------------------------[ 4
Serial Port 2 -------------------[Enabled ]
Base Address -----------------[2F8h]
IRQ --------------------------[ 3
Parallel Port -------------------[ Enabled ]
Base Address -----------------[378h]
IRQ --------------------------[ 7
Operation Mode ---------------[
ECP DMA Channel ------------[ -
Floppy Disk Controller ---------[ Enabled ]
IDE Controller -----------------[
PS/2 Mouse Controller -----------[ Enabled ]
USB Host Controller ------------[ Enabled ]
USB Legacy Mode ------------[ Disabled]
found in this menu. Settings in boldface are the default and suggested
settings.
Parameter
Serial Port 1
Base Address
Onboard Peripherals
<ALT+H> Key Help
Description
Let you enable or disable
the serial port 1.
Lets you set a logical base
address for each serial
port. This parameter is
configurable only if the
Serial Port parameter is
enabled.
Page 1/2
]
]
]
EPP
]
]
Both
]
Options
Enabled or Disabled
3F8h, 3E8h, 2E8h
53
Advertisement
Table of Contents
