Table of Contents
Advertisement
Is the printer cable connected to the correct port (serial or
parallel)?
Are your application and the printer configured for the same
operating values? Be sure there is no conflict with any port on
the add-on card. For details, check the documentation that
came with your printer.
Is the printer out of paper or jammed? Check the printer's
status indicator lights.
Are the printer cables tangled? To prevent signal interference,
neatly fold or coil excess cable length.
Add-on card fails intermittently
Do two add-on cards have conflicting addresses? "PnP/PCI
Options" on page 72 shows where you can see the addresses in
the Setup Utility's Advanced Options. See "Entering Setup" on
page 42 for instructions on entering the Advanced Level of the
BIOS Utility.
If you receive an error message
Read the corrective actions listed in "Error Messages" on page
20.
19
Advertisement
Table of Contents
