The following screen shows the "Setup Utility Advanced Options"
main menuNote: The F8 key works only when you are in the main
Memory/Cache Options
PnP/PCI Options
menu. This means that you can activate the Advanced Level only
when you are in the main menu.
The command line at the bottom of the menu tells you how to move
within a screen and from one screen to another.
To select an option, move the highlight bar by pressing
then press Enter.
Press PgDn to move to the next page or PgUp to return to the
previous page.
To change a parameter setting, press
setting is found.
Press Esc to return to the main menu. If you are already in the
main menu, press Esc again to exit Setup.
The parameters on the screens show default values. These values may
not be the same as those in your system.
The grayed items on the screens have fixed settings and are not user-
configurable.
Advanced Options
<ALT+H> Key Help
or
or
until the desired
43