Table of Contents
Advertisement
41
The BIOS Utility is a hardware configuration program built into your
system's Basic Input/Output System (BIOS).
Since most systems are already properly configured and optimized,
there is no need to run this utility. However, if you encounter
configuration problems and get the "Run Setup" message, you will
need to run this utility.
Before you run Setup, make sure that you have saved all open files.
The system reboots immediately after you exit Setup.
Note: If you repeatedly receive Run Setup messages, the battery may be
bad. In this case, the system cannot retain configuration values in CMOS.
Ask a qualified technician for assistance.
Advertisement
Table of Contents
