Table of Contents
Advertisement
22
Chapter 1
Getting Started
Error Message
I/O Resource Conflict(s)
IRQ Setting Error
Memory Error at
MMMM:SSSS:OOOOh
(R:xxxxh, W:xxxxh
Memory Resource Conflict(s)
Onboard Parallel Port Conflict
Onboard Serial Port 1
Conflict(s)
Onboard Serial Port 2
Conflict(s)
Onboard XXX... Conflicts
Press Ctrl_Alt_Esc key to
enter Setup or F1 key to
continue...
Press ESC to turn off NMI, or
any key to reboot
PS/2 Keyboard Error or
Keyboard Not Connected
Corrective Action
Try to reset resource assignments by
going to Setup and under Advanced
Options, go to PnP/PCI Options and
set the Reset Resource Assignments to
"Yes".
Contact your dealer or an authorized
service center.
Replace the RIMMs.
Try to reset resource assignments by
going to Setup and under Advanced
Options, go to PnP/PCI Options and
set the Reset Resource Assignments to
"Yes".
Change the onboard parallel port
address in CMOS Setup or set the
parallel port address of the add-on
card to others.
Change the onboard serial port
address in Setup or change the add-on
card serial port address.
Try to reassign or disable onboard
device resources.
Press F1 to reconfigure the system.
Press the "Esc" key to reject NMI
error or press any other key to reboot
the system.
Reconnect or replace the keyboard.
Advertisement
Table of Contents
