Turning The Machine On; Turning The Machine Off; Menu Settings; Access The Settings Menu - DeLonghi DINAMICA plus ECAM37095 Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

4. "INSERT WATER SPOUT": Check that the hot water spout
(D6) is inserted on the connection nozzle (A8) (fig. 6) and
place a container holding a minimum of 3.38 floz/ 100 ml
underneath (fig. 7);
5. "WATER CIRCUIT EMPTY" "PRESS OK TO START": press
to confirm. The machine delivers hot water
from the spout (fig. 8) then goes off automatically.
The coffee machine is now ready for normal use.
Please note:
The first time you use the machine, you need to make 4-5
cappuccinos before it starts to give optimal results.
To improve the performance of your machine, we recom-
mend installing a water softener filter (D4) as described in
section "17. Water softener filter".
4.

TURNING THE MACHINE ON

Please note:
Before turning the machine on, make sure the main switch
(A22) is pressed (fig. 2).
Each time the machine is turned on, it performs an automatic
preheat and rinse cycle.
To turn the machine on, press the
9). The message "HEATING UP UNDERWAY" "PLEASE WAIT"
appears on the display.
7
button (A7) (fig.
9
When heating is complete, the message changes to: "RINSING
UNDERWAY" "PLEASE WAIT". As well as heating the boiler,
this also heats the internal circuits by circulating hot water.
The machine is ready for use when the main screen (homepage)
appears.

5. TURNING THE MACHINE OFF

Whenever the machine is turned off after being used to make
espresso or coffee, it performs an automatic rinse cycle.
To turn the machine off, press the
The message "TURNING OFF UNDERWAY" "PLEASE WAIT"
appears on the display, then (if envisaged) the machine
performs a rinse cycle and goes off (standby).
Please note:
If you will not be using the machine for some time, unplug from
8
the mains socket:
first turn the machine off by pressing the
(fig. 9);
release the main switch (A22) at the back of the machine
(fig. 2).
Important!
Never press the main switch while the machine is on.
6.

MENU SETTINGS

6.1 Access the settings menu

1. Press the "
2. Scroll through the menu items by pressing
until the required items is displayed;
3. Press the menu item you want to select.

6.2 Exit the menu

When you have made the adjustments, press
until you are back on the homepage.
6.3

Rinse

Use this function to deliver hot water from the coffee spouts
(A9) and hot water spout (D6), if inserted, to clean and heat the
machine's internal circuit.
1. Place a container with a minimum capacity of 3.38 floz /
100ml under the coffee and hot water spouts (fig. 8).
2. A few seconds after the "RINSING" item has been selected,
hot water is delivered first from the coffee spouts and then
from the hot water spout (if inserted) (fig. 7).
3. To stop rinsing, press
stop automatically.
Please note:
If the machine is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
8
button (A15) (fig. 9).
" button (C3) to enter the menu;
or wait for rinsing to
button

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dinamica plus ecam37095ti

Table of Contents