Turning The Machine On - DeLonghi MAGNIFICA PLUS Manual

Setting water hardness
14. Select the water hardness level on the display according to
the result of the measurement procedure described above,
and press "Ok";
15. The water hardness selected will be saved in the machine
settings.
Please note:
The water hardness can be changed directly from the settings
menu (see "6.12 Water hardness").
Installing the water softener filter
16. The machine prompts for installation of the water softener
filter (D4): press "Start" to proceed (to postpone the opera-
tion, press "Later" instead).
17. Remove the water tank (A9) (fig. 2), fill to the MAX line
with fresh drinking water (fig. 3) and press "Next".
18. Remove the filter from the packaging and turn the date
indicator so that it shows the next 2 months (fig. 9). Press
"Next";
2
Please note:
The filter lasts about two months assuming normal use of the ma-
chine; if on the other hand the machine remains idle with the filter
installed, it will not last more than three weeks, at most.
19. To activate the filter, run tap water through the hole in the
centre of the filter until water comes out of the openings at
the side for more than a minute (fig. 10); Press "Next".
20. Insert the filter in the water tank and immerse it completely
for about ten seconds, angling and pressing it lightly so that
the air bubbles can escape (fig. 11). Press "Next".
21. Insert the filter in the filter housing (fig. 12) and press fully
home. Press "Start";
0,5 L
9
22. Close the tank with the lid (A8);
23. Reposition the water tank in the machine and press "Next".
24. Position an empty container of at least 0.5 litres capacity
under the hot water spout (fig. 7) and press "Yes" to activate
the filter;
25. The machine delivers hot water, then stops automatically.
26. The filter is now active and the machine can be used.
27. Now that all the technical aspects have been covered, press
"Start" to get to know the machine.
Setting of profiles
28. Select the number of people who will be using the machine.
Press "Next".
29. The machine automatically creates a profile for each user:
to customize the profile, press
or "Profile" button). Having made the desired changes, press
"Save".
10
30. Press "Next".
31. Press "Start" to run an introductory video.
32. At the end of the video, a QR code appears: scan this to access
manuals/support services. Press "Next".
33. Press "Start": the machine is now ready for use.
Please note:
The first time the machine is used, it will be necessary to make
4-5 cappuccinos before the drink in the cup tastes as it should.

4. TURNING THE MACHINE ON

Please note:
• Each time the machine is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The machine is not ready for use until the cycle has been
completed.
1. To turn the machine on, press
chine will switch on;
7
11
(press the "Change"
(B1)(fig. 13): the ma-
12