Table 5-8
Solid-state drive descriptions and part numbers (continued)
Description
512 GB
●
512 GB + 32 GB Optane memory
●
●
256 GB
●
256 GB + 16 GB Optane memory
16 GB Optane memory module
●
Solid-state drive, SATA-3, TLC:
256 GB
●
128 GB
●
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.0 screw (1) that secures the drive to the system board.
2.
Remove the drive (2) by pulling it away from the connector.
NOTE:
Reverse this procedure to install the solid-state drive.
Speakers
To remove the speakers, use this procedure and illustration.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Computer feet on page
Bottom cover on page
Battery on page
Solid-state drives are designed with notches to prevent incorrect insertion.
(Preparation for disassembly on page
26).
27).
28).
Spare part number
L85364-005
L85366-005
L85354-005
L85356-005
L85372-005
938184-855
L85346-005
26).