Introduction; Front View - ATEN Master View CS-138A User Manual

Introduction

Introduction

Front View

1. Port LEDs:
On Line: Lights ORANGE to indicate that the PC attached to the
corresponding port is up and running. If the LED is flashing,
it indicates that the Port is being used for Cascading to another
Master View switch.
Selected: Lights GREEN to indicate the currently selected port. The
LED is steady under normal conditions, but flashes when its
port is accessed under Auto Scan mode.
2. Port Selection Switches
Press a switch to access the PC attached to the corresponding port.
Pressing Buttons 1 and 2 simultaneously for 3 seconds performs a
Keyboard and Mouse reset
Pressing Buttons 7 and 8 simultaneously starts Auto Scan Mode.
3. CS-138A Reset
To reset the CS-138A, use a thin object (such as the end of a paper clip, or a
ballpoint pen), to press this recessed switch in to initiate a warm reset. If the
switch is kept in for longer than three seconds, a cold reset takes place.
4. Sound Opening
System sounds (beeps, etc.), are emitted from this opening.
5. Power LED
Lights to indicate that the Master View CS-138A is receiving power.
- 5 -