Osd Operation; Hotkey Navigation - ATEN Master View CS-138A User Manual

OSD Operation

OSD Operation

Hotkey Navigation

Hotkey navigation can be used under OSD mode. To hotkey select a port from
the OSD, do the following:
1. Activate the OSD by pressing the Ctrl key twice ([Ctrl] [Ctrl]).
Note: 1. If the OSD is already active, when you are at the Main Menu you
can key in the hotkey without first having to press [Ctrl] [Ctrl].
2. You can optionally change the hotkey to the Scroll Lock key (see
F6, below), in which case you would press [Scroll Lock] [Scroll
Lock].
2. From the OSD Main Menu, key in the Port ID for the computer you wish to
access (see Port ID Numbering, above, for details), then press [Enter].
The console now controls the PC that you have selected, and the OSD
automatically closes.
When you key in the Port ID, note the following:
You must key in the Port ID and press [Enter] within 1 second for each
keypress after pressing the [Ctrl+Alt+Shift] combination.
Number keys must be pressed from the regular keyboard; not from the
numeric keypad.
The keys must be pressed and released one key at a time.
If you submit an incorrect Port ID, an error message displays, and you
are returned to the OSD Main Menu.
- 16 -