Table of Contents
Advertisement
Connecting Desktop PCs
Figure i-9
1 Turn the PC power off. Unplug the monitor cable from the computer.
2 Plug the end of the supplied VGA cable with the large round collar into
the COMPUTER IN port on the projector. Plug the other end into the
computer's Monitor Out port.
3 Connect your audio source to the AUDIO IN port on the projector.
4 You can project without using the PC monitor. If you want to also use the
monitor, plug the monitor cable into the MONITOR OUT port on the
projector.
5 Turn the projector on.
6 Turn the computer on.
i-8
Introduction
Serial
Computer In
Monitor Out
Connecting a Desktop PC
S-Video
Video In
L
R
In Audio Out
Advertisement
Table of Contents
