Quick Start - Proxima LightBook 20 User Manual

LIGHT FUNCTION
Glows red to warn of an over-temperature condition.
Flashes quickly if the projector is not fully opened.
Flashes slowly if the spare lamp burns out.
Glows red when the active lamp burns out.
Flashes quickly if the projector is not fully opened.

QUICK START

Follow the appropriate section below for the type of system that you have.
Be sure to observe the indicator lights when you power up the projector.
Connecting a Notebook
NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA
cable adapter to the computer's Video Out port (or video adapter cable).
1 Plug the COMPUTER end of the supplied VGA Video cable into the
notebook's VGA Out port or into the Mac - VGA cable adapter
(Macintosh only).
Serial
Figure i-8 Connecting a notebook
2 Plug the end of the VGA Video cable with the large round collar into the
COMPUTER IN port on the projector.
3 Connect your audio source to the AUDIO IN port on the projector.
4 Turn the projector on.
Computer In Monitor Out S-Video Video In
Your Proxima Lightbook Projector i-7
L R In Audio Out