Table of Contents
Advertisement
Connecting PCs
Use the included VGA video cable to connect your PC to the projector's
COMPUTER IN port. If you want to use your monitor and Lightbook
projector at the same time, use your existing monitor cable to connect the
projector to the monitor.
Figure 1-7
Figure 1-8
1 Unplug the monitor cable from the computer.
2 Plug the end of the supplied VGA cable with the large round collar into
the projector' COMPUTER IN port. Plug the other end of the VGA cable
into the computer's Video Out (VGA) port.
3 If you want audio, connect your audio source to the AUDIO IN port on
the projector.
4 If you want to use an external monitor, connect the monitor cable to the
projector's MONITOR OUT port.
5 Turn the projector on.
NOTE: An external monitor is not required to use the Lightbook projector.
1-6
Chapter One
To Projector
VGA Connector Cable
VGA Video cable
VGA Cable
To Computer In
Connecting a PC
To Computer
Serial
Computer In
Monitor Out
S-Video Video In
From
Monitor Out
In–Audio–Out
L
R
Advertisement
Table of Contents
