Table of Contents
Advertisement
USER GUIDE
7.3
THE MENU SYSTEM
The menu system was developed to gain access to functions not often
used, as opposed to frequently used features that are directly available
through the remote control.
Press the MENU key on the remote control to invoke the menu system.
When the menu is active, the trackball is used to navigate between options
(and can therefore not be used for mouse control etc. at the same time).
The LEFT key is used to activate or deactivate an option.
The PROG key may be assigned to most of the menu options.
Toggle functions (like OSD) are tagged when active and untagged when
not active.
Increase/decrease functions (like TUNE and FREQUENCY) are adjusted
using the trackball. OSD is used to indicate the actual setting.
The MENU key is toggling the menu on and off. The menu is also switched
off after one minute of no action.
The main menu selections SETUP, PICTURE, SOUND, OPTIONS and
HELP are explained in detail below.
Features only available with some sources are shown in bold dark grey
characters in the menu illustrations, while generally available functions are
shown in black bold characters.
7.3.1
THE SET-UP MENU SELECTIONS
TUNE is used to stabilize the image. An untuned image can be seen as
sideways instability or " swimming" . The TUNE function has no effect in
VIDEO mode and has been disabled.
FREQUENCY is provided in order to adjust to special graphic cards that
are not automatically recognised by the projector. Generally, an incorrect
frequency setting can be observed as an image too wide or too narrow,
combined with vertical, unstable bands.
SVGA LCD MULTIMEDIA PROJECTOR
29
Advertisement
Table of Contents
