Table of Contents
Advertisement
USER GUIDE
SYMPTOM
Some colors are
unstable or
flickering
The whole
image appears
to be unstable
or misplaced
Cooling fan is
not working
The remote
control is not
working
The desktop
mouse is not
working
SVGA LCD MULTIMEDIA PROJECTOR
SOLUTION
Check first that there are no loose cable
connections.
You can try to adjust the image quality with the
CONTRAST and BRIGHTNESS keys.
Try to improve the tuning using the TUNE key.
If the image is scaled, press SCALE to return to
the default mode.
Adjust the frequency and tuning settings
(instability), or the image position settings
(misalignment).
Check that you are using a source with
compatible resolution.
If the fan does not work the LCD projector must
not be used and should be returned to your
dealer for repair.
Make sure you point the remote control at the
projection screen or directly at the IR receiver
The maximum range of the IR transmitters is 15
m/ 49 feet - Are you standing close enough?
If the effective range of the transmitters is
significantly reduced, the remote control needs
new batteries.
Remember that the mouse must be connected
before the computer source is switched on.
Are the mouse cable and mouse adapter
connections secure?
Check the mouse driver settings on the computer
source
You must boot the computer after the cable has
been connected for it to recognise the mouse. If
you are unsure whether this was the case, reboot
your computer.
37
Advertisement
Table of Contents
