Table of Contents
Advertisement
USER GUIDE
5. Ensure the ventilation grills on the LCD projector are not obstructed.
Check the mains voltage setting, then apply mains power to the
projector. Remember to switch on the unit at the Power ON/OFF
switch!
6. Apply mains power to the various items of source equipment.
Check that the voltage selector at the mains input is set
correctly according to the local mains voltage (selector
indicator shows 115V or 230V)
Your LCD projector is now fully connected up. Before use for your
presentation, refer to the next section on Image Adjustments to attain the
highest quality of projected image.
SVGA LCD MULTIMEDIA PROJECTOR
20
ON
OFF
Advertisement
Table of Contents
