Table of Contents
Advertisement
USER GUIDE
8.3
THE MENU SYSTEM
The menu system is designed to gain access to functions not often used, as
opposed to frequently used features that are directly available through the
remote control and the projector keypad.
The following description assumes that you have chosen
your mother tonge under OPTIONS (LANGUAGE).
Press the MENU key to invoke or exit from the menu system (see illustration
below). When the menu is active, the trackball is used to navigate between
options (and therefore is not available for mouse control etc. at the same
time). The ENTER key is used to activate or deactivate a function.
The PROG key on the remote control may be assigned to any of the menu
functions.
Toggle functions (like OSD, REAR etc) are tagged when active and
untagged when not active.
Increase/decrease functions (like TUNE and FREQUENCY etc) are adjusted
using the trackball or keyboard cursor controls. The OSD field (in the lower
left corner of the screen) indicates the actual settings.
The menu system is toggled on and off with the MENU key. The MENU is
also switched off after one minute of inactivity. Most settings are memorized
unless otherwise noted.
The main menu selections SETUP, SOUND, OPTIONS and HELP are
explained in detail below.
Features available with some sources only are shown in grey color
characters, while generally available functions are in normal case.
SETUP
PICTURE
SOUND
OPTIONS
HELP
23
SVGA LCD PROJECTOR
Advertisement
Table of Contents
