Table of Contents
Advertisement
USER GUIDE
- MAC: Insert the end of the VGA cable marked ' LCD' into COMPUTER
connector port on the LCD projector. Connect the MAC-Monitor
adapter onto the short cable section and then attach your MAC
monitor to it. Connect the MAC-Computer adapter onto the output
port on your Macintosh computer unit, and then connect the VGA
cable connector marked ' VGA' to it. If you do not intend to use the
monitor then just leave the short cable section unconnected and
the MAC monitor adapter unused.
No termination is needed on the short end cable.
SVGA LCD MULTIMEDIA PROJECTOR
18
Advertisement
Table of Contents
