Table of Contents
Advertisement
USER GUIDE
SVGA DLP PROJECTOR
13.2
LAMP REPLACEMENT
The projector is using a custom metal halide lamp for illumination. The
lamp is high pressure when hot (operating or immediately after switch-off).
Lamp pressure is normal when cold.
A lamp timer is available in the menu system under HELP, ABOUT, that
may be used to track lamp operating time. The timer may be reset by the
user.
To change lamp, remove the lamp lid by unscrewing the three screws
indicated below. A safety switch will cut off the power supply to the lamp
completely.
Lamp lid screws
Twist the handle on the small screw to unlock the lamp holder. Fold out the
large handle and pull out the lamp holder.
LOCK
LAMP HOUSE HANDLE
37
Advertisement
Table of Contents
