Ask Proxima Impression 8300 User Manual page 16

USER GUIDE
2. SET FREQUENCY. The frequency controls the width of the image. A
wrong frequency setting can be seen as equally spaced, vertical stripes
or irregularities in the pattern displayed. Invoke the menu system, SET-
UP, FREQUENCY and press ENTER. Adjust the value up or down
using the trackball or keyboard cursor controls, observing that the
amount of vertical stripes reduces, until the distortion is gone. You may
still have an unstable image, please see the next section.
3. TUNE. Tune the image for a stable projection. In the menu, select SET-
UP, TUNE and press ENTER. Adjust stability using the trackball.
4. SCALE & PAN . Scale the image as desired if you are viewing a lower
(VGA) or higher (XGA) resolution image. Scaling will fill the viewable
area by enlarging a lower resolution or compressing a higher resolution
image. If you do not scale a higher resolution image, you may choose
to PAN around instead in order to view parts of the image.
5. POSITION. Position the image correctly by accessing SET-UP,
POSITION, then press ENTER and adjust position with the trackball or
keyboard cursor controls
6. CONTRAST and BRIGHTNESS. Contrast and brightness may be
adjusted according to your personal taste, the image and the viewing
conditions. The controls are directly accessible on the remote control
and on the projector keyboard.
7. COLOR, SHARPNESS and TINT. These adjustments may be made
when viewing video images from the VIDEO or S-VIDEO inputs. These
controls do not apply to computer images.
Set-up should be done once with the source(s) you are using most
frequently. Allow some minutes for the unit to warm up before adjusting the
settings. Most settings will be memorized individually for each source for
future use.
SVGA DLP PROJECTOR
16