Table of Contents
Advertisement
USER GUIDE
16. ELECTRICAL SHOCK - To reduce the risk of electrical shock, do not
open the unit. Refer all servicing to authorized personnel only.
17. CLEANING - The projector should be cleaned only as recommended,
see the Maintenance section. Disconnect the power cord from the
power outlet before cleaning. Do not use liquid, spray or aerosol
cleaners.
18. NON-USE PERIODS - The power cord of the projector should be
unplugged from the outlet when left unused for a long period of time.
19. LAMP REPLACEMENT - Replace projection lamp with same type and
rating as shown in the Technical Data section. Allow unit to cool down
before replacement.
20. SERVICING - The user should not attempt to perform unusual or
technical service to the projector. Do not open the unit, except for the
lamp replacement door. Refer all servicing to authorized personnel
only. Replace damaged cords or cables with original replacement parts
only.
21. DAMAGE REQUIRING SERVICE - The projector should be serviced
by authorized personnel when:
objects have fallen, or liquid spilled, into the projector
the projector has been exposed to water or moisture
the projector does not appear to operate normally (fan not
working, noise, smell, smoke, heat etc.)
the projector has been dropped or damaged
22. ABNORMALITY - If you detect any abnormal smell or smoke,
immediately turn off the power switch. Disconnect the power plug from
the inlet to prevent fire or electrical shock.
23. LIFTING AND MOVING - Let the projector cool down before moving.
Disconnect the power cord and all other cables. Carry the unit by the
handle provided. The projector should preferably be transported in a
suitable case.
SXGA LCD PROJECTOR
9
Advertisement
Table of Contents
