Table of Contents
Advertisement
USER GUIDE
18.4
COMMAND SYNTAX
Every command consists of a command body ended with a delimiter. The
command body consists off a function code, a separator, and an
argument.
A function code consists of 3 to 4 ASCII letters and begins with a letter
[A-Z], [a-z]
|---------------------Command----------------------------------|
<Function code> <Separator> <Argument> <Delimiter >
|---------Command body-----------------------|
At the end of this document, the " Table of Serial Commands" lists all valid
function codes. Any other combination of characters received before a
delimiter will result in an error response from the projector to the control
unit (Host).
18.4.1
DELIMITER AND SEPARATOR
ASCII
HEX
^M
;
Always initiate programming by sending a carriage return.
DEC
0D
13
3B
59
SXGA LCD PROJECTOR
Comment
The stop of a command is
indicated by a carriage return
Used as a separator between
the function code and the
argument
3
Advertisement
Table of Contents
