Table of Contents
Advertisement
USER GUIDE
Extract carefully the old lamp from the spring loaded lamp holders as seen
in the figure below. Insert a new lamp in the reverse order. Hold the lamp
by its two metal terminals. Make sure that the little " knob" on the bulb
points upwards to ensure proper operation and to get the best light output.
Remount lamp house wall and lamp lid in reverse order.
Use only original lamp as specified. Replacement using a
different lamp may result in poor illumination, malfunction
(potentially explosion) and will void any warranties.
To reset the lamp timer, invoke the menu system under OPTIONS,
SERVICE, LAMP TIMER RESET. You need to confirm that you actually
intend to reset the lamp timer, or cancel if you accidentally invoked the
function.
Do not attempt to power up the unit before completely
reassembled!
Lamp holders
37
SXGA LCD PROJECTOR
Lamp
Advertisement
Table of Contents
