Seagate Scorpion 40 Installation Manual page 26

Scorpion 40 Installation Manual, Rev. A
LED Code summary
The following table summarizes LED flash codes for the
Scorpion 40.
LED
Clean
Media
Drive
continuously for more than 5 seconds. The tape should
eject within 40 seconds. Contact Seagate Technical
Support for more information.
Action
ON (lit)
Flashing
Slowly
Flashing
ON (lit)
Flashing
ON (lit)
Flashing
Rapidly
Meaning
Cleaning is required because
the drive has been operated
for at least 25 hours (DDS-1
and DDS-2) or 50 hours
(DDS-3 or DDS-4).
The internal error rate
threshold has been exceeded
and cleaning is required.
The cleaning cartridge in the
drive has exceeded is useful
life. Replace the old cleaning
cartridge with a new one.
A cartridge is inserted and is
not generating excessive
errors.
The drive could not write the
tape correctly (a write error
has occurred). Use a DDS
cleaning cartridge to clean the
drive.
The drive is reading or writing
the tape normally.
A hardware fault occurred.
23