Epson ET-5170 Series User Manual page 40

Printing
>
Printing Documents
1. On the printer driver's Main or More Options tab, set each item (such as Document Size and Paper Type).
2. Click Add/Remove Presets in Printing Presets.
3. Enter a Name and, if necessary, enter a comment.
4. Click Save.
Note:
To delete an added preset, click Add/Remove Presets, select the preset name you want to delete from the list, and then
delete it.
5. Click Print.
The next time you want to print using the same settings, select the registered setting name from Printing Presets,
and click OK.
Related Information
"Loading Paper" on page 31
&
"Printing Using Easy Settings" on page 38
&
Printing on 2-Sides
You can print on both sides of the paper.
Note:
❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
"Paper for 2-Sided Printing" on page 241
❏ Depending on the paper and the data, ink may bleed through to the other side of the paper.
❏ However, it may not be available when the printer is accessed over a network or is used as a shared printer.
1. On the printer driver's Main tab, select the method of 2-Sided Printing.
2. Click Settings, make the appropriate settings, and then click OK.
3. Click Print Density, make the appropriate settings, and then click OK.
When setting Print Density, you can adjust print density according to the document type.
>
Printing from a Computer - Windows
40