Epson ET-5170 Series User Manual page 286

Administrator Information
4. Pick up the handset.
If a message to start sending or receiving faxes is displayed as shown on the following screen, the connection
has been established.
Related Information
"Making the Printer Ready to Send and Receive Faxes" on page 286
&
"Making Settings to Use an Answering Machine" on page 289
&
"Making Settings to Receive Faxes Operating Only a Connected Phone" on page 289
&
"Receive Mode:" on page 261
&
Making the Printer Ready to Send and Receive Faxes
Fax Setting Wizard configures the basic fax features to make the printer ready to send and receive faxes.
The Wizard is displayed automatically when the printer is turned on for the first time. You can also display the
wizard manually from the printer's control panel. You need to run the wizard again in case the wizard is skipped
when the printer is first turned on or when the connection environment has changed.
❏ The items below are what you can set through the wizard.
❏ Header (Your Phone Number and Fax Header)
❏ Receive Mode (Auto or Manual)
❏ Distinctive Ring Detection (DRD) Setting
❏ The items below are set automatically according to the connection environment.
❏ Dial Mode (such as Tone or Pulse)
❏ Other items in Basic Settings remain as they are.
Related Information
"Basic Settings" on page 260
&
Making the Printer Ready to Send and Receive Faxes Using Fax Setting Wizard
1. Select Settings on the home screen on the printer's control panel.
>
Settings to Use the Printer
286
>
Making Fax Features Available