Epson ET-5170 Series User Manual page 288

Administrator Information
"Basic Settings" on page 260
&
Making Settings for the Printer's Fax Features According to Use
You can configure the printer's fax features individually using the printer's control panel according to use. The
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
Related Information
"Fax Settings" on page 256
&
"Making Settings for a PBX Phone System" on page 288
&
"Making Settings When You Connect a Phone Device" on page 289
&
"Receiving Incoming Faxes" on page 93
&
"Making Settings to Save Received Faxes" on page 289
&
"Making Settings for Blocking Junk Faxes" on page 290
&
"Making Settings to Send and Receive Faxes on a Computer" on page 291
&
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
4. When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select
the Access Code box to make this to Use.
The #, entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in Contacts that have external access codes such as 0 and 9.
If you have registered recipients in Contacts using an external access code such as 0 and 9, set the Access Code to Do
Not Use. Otherwise, you must change the code to # in Contacts.
5. Tap the Access Code input box, enter the external access code used for your phone system, and then tap OK.
6. Select OK to apply the settings.
The access code is stored in the printer.
>
Settings to Use the Printer
288
>
Making Fax Features Available