Surface Wallmount Installation - Enterasys RoamAbout R2 Installation Manual

Surface Wallmount Installation

Follow the step-by-step procedure below to install the RoamAbout R2 on the surface of a
wall, cubical wall, vertical support structure, or ceiling.
1. Make sure the site primary power for the RoamAbout R2 conforms to the
specifications detailed in
2. Select the optimum mounting location:
— With easy access for inspection and service.
— If using remote power, close to the 10BaseT/100BaseT Ethernet network cable
connector.
— If not using remote power, within six feet of an AC electrical outlet:
a) If using redundant power (connecting both local power and remote power).
b) If using the local power option and not using the remote power option.
Chapter 2,
or
Surface Wallmount Installation
Cabling and Wiring.
3-9