Table of Contents
Advertisement
60
C
8: W
HAPTER
EB
SIP Settings
C
ONFIGURATION
Table 29
Network Profile Settings
Setting
Network Profile
Name:
ESSID:
Data Rate:
Security:
IP Setting:
NAT Setting:
2 Select Save to confirm your settings. Alternatively, you can select Cancel
to leave the settings unchanged, or Reset to remove the settings.
3 Edit the Certification settings (CA Cert./ User Cert./ Private Key) as
needed.
4 Edit your SIP Account Choice setting as needed.
Select SIP Account Settings to display the SIP Account List. From this list
you can Configure or Remove a SIP Account.
Description
Enter the network profile name.
Stands for Extended Service Set Identifier. Specifying the ESSID
is how you make sure that you connect to your wireless
network instead of your neighbor's network by mistake. You
can either manually input the New ESSID or select Site
Survey to check all available networks. For example: Default.
It can be set as Auto, 1Mbp/s, 2Mbp/s, 5.5Mbp/s, 6Mbp/s,
9Mbp/s, 11Mbp/s, 12Mbp/s, 18Mbp/s, 24Mbp/s, 36Mbp/s,
48Mbp/s or 54Mbp/s.
Options include: OPEN, WEP-64, WEP-128, WPA-PSK TKP,
WPA, PSK AES, WPA2-PSK TKP, WPA2-PSK AES, WPA TKIP,
WPA AES, WPA2 TKIP, WPA2 AES
Select one of the following: DHCP, Fixed IP or PPPOE.
Select one of the following: Disable, SIP PING or STUN. You
can also set NAT timer.
Advertisement
Table of Contents
