Tension Spring (Kf); Tension Spring (Kf); Chassis (T, 614) Sub Assy (Cha1); Chassis (T, 614) Sub Assy (Cha1) - Sony XAV-701BT Service Manual

XAV-701BT/741
2-4.

TENSION SPRING (KF)

tension spring (KF)

B
Hang in order of A, B by pay
attention spring of direction.
1 Remove the tension spring (KF)
2-5.

CHASSIS (T, 614) SUB ASSY (CHA1)

i e settin
OK
[white] [red]
[black]
SERVO
board
Note 1: Fit between chassis and SERVO
board. Be careful wire not protrude
from this part.
2 Remove three solders
of SENSOR board wire.
SERVO
board
– DVD mechanism deck block bottom side view –
1 Bend the claw in the direction of an arrow.
6
A
from a hole.
NG
Note 2: Do not overlap
on the SERVO
board.
5 Remove the chassis (T, 614) sub assy
in the direction of an arrow.
3 tension spring (KF)
2 Remove the tension spring (KF)
from a hook.
6 label (S)
3 precision screw
(P1.7 2.2)
guide line damper (S)
hole
spacer (PWB, 614)
chassis (M, 614) complete assy
(CHA2)
3 three precision screws
(P1.7
2.2)
7 chassis (T, 614)
sub assy
(CHA1)
4 claw