2-6.
CHASSIS (OP, 614) COMPLETE ASSY (OP1)
5 chassis (OP, 614) complete assy
(OP1)
1 shaft
4 compression spring
(damper) (blue)
2 Remove the chassis (OP, 614)
complete assy in the direction
of an arrow.
Note: When installing the chassis (OP, 614) complete assy (OP1),
Check that the damper (S) is not crushed by the shaft.
1 shaft
chassis (OP, 614)
complete assy
(OP1)
shaft
damper (S)
1 shaft
OK
3 two compression springs
(damper) (natural)
XAV-701BT/741
chassis (OP, 614)
complete assy
(OP1)
shaft
Damper (S) is crushed.
damper (S)
NG
7